| Fabrication Techniques of Stretchable and Elastomer-Fabric Electroadhesion Samples for Implementation on Devices with Space Application |
Completed
|
3 |
Grappling Technologies |
University of Southern California |
| Modeling Lunar Dust Behavior to Advance the Effectiveness of Dust Mitigation Techniques |
Completed
|
4 |
Particulate Contamination Prevention and Mitigation |
University of Colorado Boulder |
| Shock Layer Radiation Modeling (SLRM) |
Completed
|
6 |
Integrated Modeling and Simulation for EDL |
Ames Research Center |
| Determining Extraterrestrial Regolith In Situ Resource Utilization Feasibility Via Rheological Characterization and Additive Manufacturing Suitability |
Completed
|
2 |
Manufacturing Processes |
Rice University |
| Prediction and Optimization of Truss Performance for Lightweight, Intelligent Packaging and Deployable Structures |
Completed
|
3 |
Electronic Packaging and Implementations |
California Institute of Technology |
| Multifunctional, robotically reconfigurable system for structural support |
Completed
|
3 |
Lightweight Concepts |
Columbia University in the City of New York |
| A Detailed Assessment for the Potential use of Waste Hydrogen Gas at Stennis Space Center Project |
Completed
|
5 |
— |
Stennis Space Center |
| A Space-based Tractor Beam for Neutral Atoms:A Hybridized Magnetic and Optical Trap for Generating Macroscopic Quantum Matter in Orbit, Year 2 |
Completed
|
6 |
Sensors and Instruments |
Jet Propulsion Laboratory |
| Enabling Ring-Cusp Ion Thruster Technology for NASA Missions, Year 2 |
Completed
|
5 |
Electrostatic Propulsion |
Jet Propulsion Laboratory |
| Monitoring Astronaut Performance Using Robotic Exoskeletons |
Completed
|
3 |
Human Factors Engineering |
The University of Texas at Austin |
| Lunar Volatiles Extraction Technology for Future Fusion Power and Multi-Outpost Scale Human Space Exploration |
Completed
|
3 |
Resource Acquisition, Isolation, and Preparation |
University of Wisconsin-Madison |
| Resonant Power Processing Unit for Low Power Hall-Effect Thrusters |
Completed
|
4 |
Electrical Power Conversion and Regulation |
Glenn Research Center |
| Maturing the M10A 25,000lbf LOX/Methane Broadsword Engine |
Completed
|
7 |
Cryogenic Propulsion |
Masten Space Systems, Inc. |
| Passive and compact liquid metal heat switch |
Completed
|
3 |
Heat Transport |
Washington University in St Louis |
| Micro-Raman for Offworld Construction (µROC) |
Completed
|
2 |
Sensors and Instruments |
Marshall Space Flight Center |
| ISRU-Hydrogen/Methane Separator for Mars (HMSM-BAA) |
Completed
|
5 |
Resource Processing for Production of Mission Consumables |
Skyhaven Systems, LLC |
| Design of Broadcast Navigation Message for Lunar Navigation System Satellites |
Completed
|
3 |
Navigation Sensors |
Stanford University |
| Direct-Write Additive Manufacturing for Miniaturized Detector and Electronic Assemblies, Year 2 |
Completed
|
3 |
— |
Goddard Space Flight Center |
| Polaris Project: Radiation Assessment DuRing Exposure and long-Duration Spaceflight (RADREADS) |
Completed
|
3 |
Human Health, Life Support, and Habitation Systems |
Ames Research Center |
| Active Collision Avoidance for Planetary Landers |
Completed
|
3 |
Microwave, Millimeter Waves, and Submillimeter Waves |
Marshall Space Flight Center |
| Big-data Efficiency and Automated Science Transfer (BEAST) |
Completed
|
3 |
Integrated Modeling and Simulation for EDL |
Ames Research Center |
| Integration of Robotic Perception and Action |
Completed
|
3 |
Sensing for Robotic Systems |
University of Massachusetts-Amherst |
| Optical CDMA for CubeSats, Year 1 |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| Polaris Project: Radiation Tolerant and Reliable Electric Displays: a Preliminary Assessment Necessary for Deep-spaceflight ApplicationS (2REDPANDAS) |
Completed
|
5 |
Sensors and Instruments |
Johnson Space Center |
| Improved Actuator for Pyroless Isolation Valve |
Completed
|
4 |
Integrated Systems and Ancillary Technologies |
Marshall Space Flight Center |
| Ruggedized WDM-based Fiber Optics Interrogator supporting Structural Health Monitor for Reusable Rocket Launches |
Completed
|
4 |
Launch, Recovery, and Reuse |
Armstrong Flight Research Center |
| National Center for Advanced Manufacturing (NCAM) |
Completed
|
6 |
Lightweight Structural Materials |
Marshall Space Flight Center |
| 2nd Generation QUAd-core siTARA Flight Computer (QUATARA) |
Completed
|
6 |
— |
Marshall Space Flight Center |
| Dismantling Rubble Pile Asteroids with Area-of-Effect Soft-bots (AoES) |
Completed
|
2 |
Resource Acquisition, Isolation, and Preparation |
University of Colorado Boulder |
| Instrumented Suit Hard Upper Torso (HUT) for Ergonomic Assessment |
Completed
|
3 |
— |
Johnson Space Center |
| Spacesuit Evaporator-Absorber-Radiator (SEAR) |
Completed
|
4 |
Heat Rejection and Storage |
Johnson Space Center |
| DNA Extraction and Preparation for a Sequencing Process from Low Biomass Samples (DEAP Seq PLS) |
Completed
|
7 |
Air, Water, Microbial, and Acoustic Sensors |
Johnson Space Center |
| Single-sided Temporary Adhesion in Zero-G |
Completed
|
3 |
— |
Johnson Space Center |
| Augmented Reality and the Internet of Things |
Completed
|
3 |
— |
Ames Research Center |
| Shark Inspired Flow Control |
Completed
|
2 |
Turbine-Based Jet Engines |
Glenn Research Center |
| Spherically Actuated Motor (SAM) |
Completed
|
4 |
— |
Marshall Space Flight Center |
| A Magneton Sputter Deposition System for the Development of Multilayer X-ray Optics, Year 2 |
Canceled
|
7 |
Mirror Systems |
Marshall Space Flight Center |
| A 3-D Printed Microfluidic Microgravity Microbial Fuel Cell for Satellite Missions |
Completed
|
3 |
— |
Ames Research Center |
| Solar System Pony Express, (revised from 2019) (PonyEx) |
Completed
|
2 |
Revolutionary Communications Technologies |
Jet Propulsion Laboratory |
| APIS (Asteroid Provided In-Situ Supplies): 100MT Of Water from a Single Falcon 9 (APIS) |
Completed
|
3 |
Resource Acquisition, Isolation, and Preparation |
— |
| Electrostatic Separation of Lunar Regolith for Size Beneficiation Using Same-Material Tribocharging |
Completed
|
3 |
Resource Processing for Production of Mission Consumables |
University of Maryland-College Park |
| Development of an Earth Smallsat Flight Test to Demonstrate Viability of Mars Aerocapture |
Completed
|
3 |
Thermal Protection Systems |
University of Colorado Boulder |
| Bio-Mimetic Concepts for Next-Generation Turbomachinery |
Completed
|
6 |
— |
Glenn Research Center |
| Utilizing Augmented Reality Smart Glasses in Digital Transformation of Space Flight Structures for Limited Tooling Assemblies. |
Completed
|
5 |
Digital Transformation Technologies for Manufacturing |
Goddard Space Flight Center |
| Merging Geospatial Data into a User-Friendly Application to Support Sustainable Development, Year 1 |
Completed
|
7 |
— |
Stennis Space Center |
| Low Temperature, High-Energy Lithium Metal Batteries Enabled by Lithium Alloy Materials |
Completed
|
2 |
Electrochemical Storage: Batteries |
Georgia Institute of Technology-Main Campus |
| Graphene Frequency Multiplier for Harsh Environment Communications |
Completed
|
— |
Electronics |
Glenn Research Center |
| Multi Satellite Cooperative and Non-Cooperative Trajectory Coordination |
Completed
|
3 |
Trajectory Design and Analysis |
University of Colorado Boulder |
| Space Robotics Challenge |
Completed
|
6 |
— |
Johnson Space Center |
| Crystallization studies of zblan glass in an electrostatic levitator |
Completed
|
2 |
Electromagnetic Wave–Based Sensors |
Marshall Space Flight Center |