← Back to NASA Technology Projects
Parachute Cord Tension Sensor
Completed
TRL 6 (started at 1, targeting 6)
Description
To design and fabricate a light weight (few oz), very small (~2 inch length) parachute cord tension sensor demonstrator device. A major challenge for the CPAS (The parachute system for the Orion/MPCV vehicle) program is to estimate the jerk load during parachute deployment. Accurate determination of this jerk load would enable proper selection and sizing of not just the parachute cords but the entire parachute attach structure on the vehicle. At present, this is estimated using analytical methods based on fluid mechanics principles. Current sensors that may be attached to the parachute cords tend to be very heavy, occupy too much volume and potentially interfere with the parachute deployment process. Instrumenting 60+ parachute cords with these large sensors would thus not be viable. The proposed sensor will alleviate these issues. The CPAS project manager did express the desire for such a device.
Benefits
Current sensors that may be attached to the parachute cords tend to be very heavy, occupy too much volume and potentially interfere with the parachute deployment process. Instrumenting 60+ parachute cords with these large sensors would thus not be viable. The proposed sensor will alleviate these issues.
Details
| Technology area | Entry, Descent, and Landing > Vehicle Systems > Instrumentation and Health Monitoring for EDL |
| Program | Center Innovation Fund: JSC CIF (JSC CIF) |
| Lead organization | Johnson Space Center, Houston, TX |
| Start date | 2012-01-01 |
| End date | 2012-04-01 |
Project contacts
Listed on TechPort itself — the most direct way to ask about this specific project.
How to get involved
This is early/mid-stage (TRL 6) — the most realistic path in is NASA SBIR/STTR, which funds small businesses and research institutions to develop technology aligned with NASA's needs (equity-free, phased funding). Check whether a current SBIR/STTR solicitation topic overlaps with this project's technology area, or contact the project directly (above) to ask.
None of these are guaranteed paths for this specific project — TechPort itself doesn't have an "apply" button. Reaching out to the contact(s) above with a specific question is usually the fastest way to find out what's actually open.