Silent and Efficient Supersonic Bi-Directional Flying Wing

We propose a Phase I study for a novel concept of a supersonic bi-directional (SBiDir) flying wing (FW) that has the potential to revolutionize supersonic flight with virtually zero sonic boom and ultra-high aerodynamic efficiency. The SBiDir-FW planform is symmetric about both the longitudinal and span axes. For supersonic flight, the planform can have as low aspect ratio and as high sweep angle as desired to minimize wave drag and sonic boom. For subsonic mode, the airplane will rotate 90deg in flight to achieve superior stable aerodynamic performance. The conflict of subsonic and supersonic aerodynamic performance of conventional fuselage-wing configuration is hence removed. The preliminary CFD simulation for a SBiDir-FW business jet (BJ) at Mach numbers of 1.6 and 2.0 indicates that the configuration generates no N-wave sonic boom on the ground at a high lift to pressure drag ratio L/Dp of 16. The superior supersonic aerodynamic performance is benefited from the sharp nose and ultra-slender body with a low aspect ratio of 0.33, which translates to a very high subsonic aspect ratio of 33 for high subsonic performance. This proposal has three objectives: 1) design refinement of a supersonic SBiDir-FW BJ configuration using CFD; 2) mission analysis assisted with CFD simulation for the supersonic SBiDir-FW BJ to study the feasibility; and 3) wind tunnel testing of the SbiDir-FW BJ to verify its supersonic aerodynamic performance and sonic boom signature. The research team is highly qualified to perform the proposed tasks.

We propose a Phase I study for a novel concept of a supersonic bi-directional (SBiDir) flying wing (FW) that has the potential to revolutionize supersonic flight with virtually zero sonic boom and ultra-high aerodynamic efficiency.

This is early/mid-stage (TRL 2) — the most realistic path in is NASA SBIR/STTR, which funds small businesses and research institutions to develop technology aligned with NASA's needs (equity-free, phased funding). Check whether a current SBIR/STTR solicitation topic overlaps with this project's technology area, or contact the project directly (above) to ask.

None of these are guaranteed paths for this specific project — TechPort itself doesn't have an "apply" button. Reaching out to the contact(s) above with a specific question is usually the fastest way to find out what's actually open.