Non-Intrusive, Distributed Gas Sensing Technology for Advanced Spacesuits

Advances in spacesuits are required, to support the ISS and future human exploration. Spacesuit development and ground-based testing require sensing and analytical instrumentation for characterizing and validating prototypes. While miniature thermosensors measure reliably at low cost, and can be incorporated all around spacesuit prototypes, incorporating gas sensors at locations of interest inside a spacesuit has been a significant challenge in particular for human subject tests because of the size and cost of available instrumentation. The sensor probes and cables must not restrict the suit or human subjects' mobility, and must not disturb the gas flow. Intelligent Optical System is developing luminescence-based sensing patches for non-intrusive monitoring of critical life support gas constituents and potential trace contaminants in spacesuits. Flexible sensitive patches inside prototype spacesuits are interrogated via optical fibers, and do not disturb the gas flow or the human subject. This will give suit engineers great flexibility for choosing multiple sensing points, fitting the sensor elements into the spacesuit, and cost effectively relocating the sensor elements as desired. In Phase I, a first demonstrator was validated at Johnson Space Center by comparison with current instrumentation used in the Suited Manikin Test Apparatus. Phase II will produce an advanced system ready for integration into NASA programs, and for commercialization (TRL9).

he proposed technology will apply directly to the NASA AES program, facilitating the rapid and effective development of novel EVA systems, and the demonstration of key capabilities for future human missions beyond Earth orbit. In addition, the sensors under development will find direct application for gas monitoring in the PLSS, with potential to overcome problems and failures reported with existing technologies. Potential markets for noninvasive sensor patches include industries that apply protective packaging to moisture- or oxygen-sensitive goods, e.g., electronic components, hygroscopic chemicals, pharmaceuticals, food, and surgical and dental instruments. Incorporating patches inside sample packages will enable them to check gas composition nondestructively throughout the life of the packaged product.

This is a mature technology (TRL 9) — the realistic path in is usually NASA's Technology Transfer Program: licensing an existing NASA patent, or a Space Act Agreement to use NASA facilities/expertise directly. NASA also runs a startup licensing program with no upfront fee for companies formed to commercialize a specific NASA technology.

None of these are guaranteed paths for this specific project — TechPort itself doesn't have an "apply" button. Reaching out to the contact(s) above with a specific question is usually the fastest way to find out what's actually open.