← Back to NASA Technology Projects
Completed TRL 6 (started at 4, targeting 6)
In this Phase II program we propose to develop a manufacturable production process to introduce backside contacts to MicroLink Devices? large-area, multi-junction epitaxial lift-off (ELO) solar cells. We will also develop new assembly processes to fabricate flexible Kapton sheets with backside contact ELO solar cells. This enables an important path for cost reduction using fully automated laydown and interconnect of solar panels. The new backside contact ELO solar cell technology has potential benefits for future NASA solar electric propulsion (SEP) programs using very large solar cell arrays. Backside contacts are used in the highest efficiency silicon solar cells manufactured by SunPower (>24% efficiency in production) but have never been successfully applied commercially to multi-junction solar cells. Benefits for large-area space solar cell include: higher device efficiency by reducing topside grid shadow and resistive losses, new approaches for panel assembly by placing contacts on backside of solar cell, and reduced arcing in high-voltage arrays by eliminating topside interconnects. The proposed technology builds on MicroLink Devices? low-cost, lightweight ELO solar cell technology and previous experience with backside contact solar cells for CPV applications.
Future NASA solar electric propulsion (SEP) systems will require entirely new solar cell technologies that are high efficiency, lightweight, flexible as well as low cost. The very large solar cell arrays will also need new approaches to panel assembly to reduce weight and stowage volume during launch. The backside contact ELO solar cells to be developed in this program are an enabling technology that addresses many of these requirements.
There are many potential applications for this technology including commercial satellites and solar cell arrays for powering unmanned aerial vehicles (UAVs). New generations of commercial satellites can benefit directly from technology advances made for future SEP solar arrays, including the lower cost, light weight and flexibility of MicroLink IMM ELO solar cells, as well as new approaches to panel assembly enabled by backside contacts. Solar arrays for UAVs are also an emerging market for lightweight, flexible, high-efficiency solar cells. The assembly of UAV solar arrays can be greatly simplified by attaching backside contact solar cells and bypass diodes directly to Kapton sheets with predefined and patterned metal interconnects.
Listed on TechPort itself — the most direct way to ask about this specific project.
This is early/mid-stage (TRL 6) — the most realistic path in is NASA SBIR/STTR, which funds small businesses and research institutions to develop technology aligned with NASA's needs (equity-free, phased funding). Check whether a current SBIR/STTR solicitation topic overlaps with this project's technology area, or contact the project directly (above) to ask.
None of these are guaranteed paths for this specific project — TechPort itself doesn't have an "apply" button. Reaching out to the contact(s) above with a specific question is usually the fastest way to find out what's actually open.