← Back to NASA Technology Projects
Completed TRL 7 (started at 2, targeting 7)
Goddard Space Flight Center Distributed Space Mission (DSM) seeks to design and develop the technologies required to achieve the mission goals. For a constellation of small satellite performing a coordinate mission, there are inter-satellite links within the constellation for the control and mission data transmission. This proposal is to develop a system simulator to support the design and optimization of the SmallSat constellation inter-satellite links. The system simulator is a tool to perform modeling and simulation of the constellation geometry, flight communication system and data transmission protocols for the determination of the optimal configuration of the inter-satellite links relative to the constraints of the mission. In Phase I, the simulator will address the need of Constellation Design Reference Mission (DRM-C) and Precision Formation Flying DRM (DRM-PFF). In Phase II, the development of the simulator will be extended to address generic constellation scenarios, from Low Earth Orbit (LEO) to deep space (Cis-lunar and beyond)
The objectives of the study are:
- S, X and Ka-band flight system modeling including link quality and time varying behavior of the SmallSat constellation inter-satellite links with MATLAB Simulink tool
- SmallSat constellation geometry modeling with STK
- Switched packet IP network simulation to model the actual activity within the constellation switched packet IP network with QualNet tool
- Routing implementation
- Simulation of the desired user data flow pattern that will ultimately ‘load’ the network.
Deliverables will include:
- S, X and Ka-band flight system software model
- Constellation geometry software model
- Constellation switched packet IP network simulation software model
- Routing protocol implementation software model
- Desired user data flow pattern software model
Research and Development Plan
SmallSat Constellation inter-satellite link communication requirements
In phase I, the SmallSat constellation inter-satellite link simulator requirements will be derived from the DRM-C and DRM-PFF missions.
System Simulator Modeling Overview
The simulator will model the flight communication system of the constellation inter-satellite links using STK/MATLAB Simulink tool. The constellation geometry and the trajectory dynamic will be modelled with STK tool. The small satellite network performance will be modelled with QualNet tool.
The software and communication protocols for control and data transmission management will borrows heavily from wireless IP networking standards.
System Simulator Architecture
The simulator architecture will consist of six major elements as shown in Table 1. System Simulator Architecture Elements (see project library)
A small Satellite Constellation simulation scenario is shown Figure 1.(see project library)
The simulator inputs and outputs are shown in Table 2. Simulator Inputs and Outputs (see project library)
The system simulator will be able to simulate the network efficiency (i.e. inter-satellite link performance) of a constellation configurations for a variety of performance cost-based routing. The inputs to the simulator represent different combinations of mission requirements while the outputs represent how well those requirements are met based on the given constellation configuration. The end goal is that the mission designer is able to evaluate different mission configurations and their associated performance.
For the DRM-C and DRM-EEF missions, an analysis will be performed by the simulator to provide a solution to the inter-satellite link communication system design.
Software Communication Protocol Reuse
The software communication protocol developed in this task can be re-used for deployment on a testbed for prototype system-level testing and even for an on-orbit DSM mission and others.
DSM mission contains inter-satellite links between the satellites in a constellation. The challenge with this mission is that the geometric configuration of the constellation and the configuration of the inter-satellite link communication system directly affect the quantity and timeliness with which science data is returned to the mission operations center (MOC). A simulation tool is needed to support the design and development of the inter-satellite links. The proposed SmallSat constellation inter-satellite link system simulator will model the constellation geometry, the flight communication system and the control and data transmission management protocols for the determination of the optimal configuration of the inter-satellite links relative to the constraints of the mission, such as constellation geometry and data throughput requirements. It is an essential tool for the development of a testbed for prototype system-level testing and development to validate the communication hardware and protocols in an integrated environment. It also is useful for the DSM mission system design. The software communication protocol developed in this task can be re-used for deployment on a testbed for prototype system-level testing and even for an on-orbit DSM mission and others. The primary customer for this study is cross cutting technology and capabilities.
Listed on TechPort itself — the most direct way to ask about this specific project.
This is a mature technology (TRL 7) — the realistic path in is usually NASA's Technology Transfer Program: licensing an existing NASA patent, or a Space Act Agreement to use NASA facilities/expertise directly. NASA also runs a startup licensing program with no upfront fee for companies formed to commercialize a specific NASA technology.
None of these are guaranteed paths for this specific project — TechPort itself doesn't have an "apply" button. Reaching out to the contact(s) above with a specific question is usually the fastest way to find out what's actually open.