Ablative Flexible Aerogel TPS Materials for Mars Aerocapture and Entry

Renewed interest in missions to explore other planets has created a need for new advanced heat shield systems that will protect spacecraft from the severe heating encountered during hypersonic flight through planetary atmospheres. Both reusable and ablative TPS have been developed to protect spacecraft. Typically, reusable TPS have been used for the Shuttle where the reentry conditions are relatively mild while ablative TPS materials have been used on planetary entry probes where high heating rates are generated. Additional advances in TPS design are needed to deliver large payloads to the moon and Mars, and to explore the outer planets. Flexible or deployable aeroshells offer an approach for achieving larger aeroshell surface areas for entry vehicles than otherwise attainable without deployment. Larger surface area aeroshells offer the ability to decelerate high-mass entry vehicles at relatively low ballistic coefficients. However, for an aeroshell to perform even at the low ballistic coefficients attainable with deployable aeroshells, a flexible thermal protection system (TPS) is required that is capable of surviving reasonably high heat flux and durable enough to survive the rigors of construction, handling, and deployment. Aspen Aerogels proposes to develop ablative flexible reinforced aerogels to meet this challenge.

The aerogels developed in this project would find applications for military hypersonic vehicles.

The multifunctional aerogel-based materials developed during this project will have applications as ablative TPS for use on many NASA spacecraft.

This is early/mid-stage (TRL 3) — the most realistic path in is NASA SBIR/STTR, which funds small businesses and research institutions to develop technology aligned with NASA's needs (equity-free, phased funding). Check whether a current SBIR/STTR solicitation topic overlaps with this project's technology area, or contact the project directly (above) to ask.

None of these are guaranteed paths for this specific project — TechPort itself doesn't have an "apply" button. Reaching out to the contact(s) above with a specific question is usually the fastest way to find out what's actually open.