1.57 Micron High Pulse Energy Single Frequency Fiber Laser

We propose to demonstrate and build a 1.572 micron single frequency high pulse energy and high peak power fiber laser by using an innovative Er-doped gain fiber with large core diameter and high gain per unit length. 1.572 micron single frequency high energy and high peak power fiber laser is needed for accurately measuring column CO2 concentrations . In Phase I, we will design and fabricate the large core diameter fiber, demonstrate high gain per unit length at 1.572 micron, and demonstrate high pulse energy and high peak power fiber laser with a short piece of gain fiber. Successful demonstration of such a fiber laser will enable many new NASA and commercial applications.

NASA plans to launch ASCENDS in 2023 in according to the US National Research Council�s 2007 Decadal Survey recommendation to accurately measure column CO2 concentrations using the IPDA technique. For ASCENDS mission NASA would need a pulsed singe frequency polarization maintaining (PM) laser system with >3.2mJ pulse energy, 3.2 kW peak power, repetition rate of 7.5kHz, and beam quality (M2) of <1.5. This proposed laser can be used for ASCENDS.

This eye-safe high pulse energy and high peak power single frequency fiber lasers can be used to build commercial lidar for ranging and gas monitoring applications, for optical sensing, fast scanning biomedical imaging, and scientific research.

This is early/mid-stage (TRL 3) — the most realistic path in is NASA SBIR/STTR, which funds small businesses and research institutions to develop technology aligned with NASA's needs (equity-free, phased funding). Check whether a current SBIR/STTR solicitation topic overlaps with this project's technology area, or contact the project directly (above) to ask.

None of these are guaranteed paths for this specific project — TechPort itself doesn't have an "apply" button. Reaching out to the contact(s) above with a specific question is usually the fastest way to find out what's actually open.