A High dV Miniature Ion Thruster for SmallSat Primary Propulsion

CubeSats enable a wide range of important, low-cost space missions, leveraging increasing densification of electronics and communications equipment to perform tasks previously in the realm of much larger spacecraft. CubeSats in sizes of 3U-12U are a promising platform for future NASA exploration and science missions, including lunar remote sensing, NEO exploration, and planetary defense, but currently lack the high ΔV propulsion required for these exciting applications. Ion thrusters are currently the best option for low power, mN range EP as required for high ΔV SmallSat missions. These thrusters are inherently more efficient than other options such as RF or Microwave, and are capable of high total impulse. This work aims to realize these advantages at the low power, miniature scale. I propose a multi-pronged approach for the improvement of the TRL 4 MiXI thruster for miniature spacecraft and precision flying applications. By incorporating lessons learned from the UCLA Plasma and Space Propulsion Lab's MARCI experiment, the discharge efficiency of MiXI will be improved to that of larger, conventional ion thrusters, resulting in a final system with >70% total efficiency, under 100W operation, Isp >1500s, >1000m/s ΔV capability on 3-12U CubeSats, and 0.1-1.55mN thrust. Computational simulations and experimental validations will be undertaken to optimize the MARCI discharge for a miniature ion thruster, which will then be integrated into the heritage MiXI thruster. New grids will be designed for the resulting change in discharge conditions. Flight-worthy miniature cathodes will be implemented as electron sources for the discharge and beam neutralization while minimizing propellant and power usage. The resulting enhanced MiXI will be characterized within the Plasma & Space Propulsion Lab's Miniature Electric Propulsion Test Facility to establish throttle curves and performance. Lifetime will be assessed through a 1000-hour grid life validation test and extended to 30000 hours through NSTAR models. Finally, the thruster will be assembled into a complete propulsion subsystem and tested within a spacecraft analog in simulated space conditions for TRL 6 maturation. This development effort promises to enable low power missions with high ΔV, high propellant efficiency, and high electrical efficiency. Miniature ion thruster development is a NASA identified enabling technology for missions in planetary science, heliophysics, and astronomy, with the primary application of SmallSat and CubeSat primary propulsion. This work will address the primary obstacle for widespread adoption of miniature ion thrusters. This will be accomplished by dramatically improving the electrical efficiency of MiXI through the implementation of a novel discharge topology, and demonstration of a propulsion system capable of >1,000m/s ΔV for SmallSat missions.

This development effort promises to enable low power missions with high \xceV, high propellant efficiency, and high electrical efficiency. Miniature ion thruster development is a NASA identified enabling technology for missions in planetary science, heliophysics, and astronomy, with the primary application of SmallSat and CubeSat primary propulsion. This work will address the primary obstacle for widespread adoption of miniature ion thrusters. This will be accomplished by dramatically improving the electrical efficiency of MixI through the implementation of a novel discharge topology, and demonstration of a propulsion system capable of >1,000m/s \xceV for SmallSat missions.

This is early/mid-stage (TRL 3) — the most realistic path in is NASA SBIR/STTR, which funds small businesses and research institutions to develop technology aligned with NASA's needs (equity-free, phased funding). Check whether a current SBIR/STTR solicitation topic overlaps with this project's technology area, or contact the project directly (above) to ask.

None of these are guaranteed paths for this specific project — TechPort itself doesn't have an "apply" button. Reaching out to the contact(s) above with a specific question is usually the fastest way to find out what's actually open.