| Elastomeric Dampers derived from First-Principles-Based Analytical Simulation, Phase II |
Completed
|
— |
Integrated Modeling and Simulation for EDL |
Ames Research Center |
| Solid Oxide Fuel Cell/Turbine Hybrid Power System for Advanced Aero-propulsion and Power, Phase I |
Completed
|
— |
Electrochemical Storage: Fuel Cells |
Glenn Research Center |
| WGM Resonators for Proteomic Analysis, Phase I |
Completed
|
— |
Alternative Low-Carbon Jet Fuel |
Marshall Space Flight Center |
| Efficient Thermally Stable Spectral Control Filters for Thermophotovoltaics, Phase I |
Completed
|
— |
Resource Acquisition, Isolation, and Preparation |
Glenn Research Center |
| Flow-Angle and Airspeed Sensor System (FASS) Using Flush-Mounted Hot-Films, Phase II |
Completed
|
— |
Aerodynamics |
Armstrong Flight Research Center |
| Simulation Environment for CubeSat Hardware-In-The-Loop Test Bed |
Completed
|
2 |
Testing and Evaluation |
Goddard Space Flight Center |
| Quantum Calorimeters Based on HgCdTe Alloys, Phase II |
Completed
|
— |
Detectors and Focal Planes |
Goddard Space Flight Center |
| Thermo-Acoustic Convertor for Space Power, Phase I |
Completed
|
— |
Dynamic Energy Conversion |
Glenn Research Center |
| Lightweight and Energy Efficient Heat Pump, Phase I |
Completed
|
— |
Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors |
Jet Propulsion Laboratory |
| Smart Crucibles and Heat Pipes, Phase II |
Completed
|
— |
Heat Rejection and Storage |
Marshall Space Flight Center |
| A Hardware/Software Design Environment for Reconfigurable Communication Systems, Phase I |
Completed
|
— |
Informatics and Decision Support Systems |
Glenn Research Center |
| Optical Relative Attitude Sensor for Short-Range Navigation, Phase I |
Completed
|
— |
Radiation-Hardened Extreme-Environment Components and Implementations |
Johnson Space Center |
| High Operating Temperature, Radiation-Hard MIM Thermophotovoltaic Converters, Phase I |
Completed
|
— |
Measurement and Control |
Glenn Research Center |
| Advanced Pumps and Cold Plates for Two-Phase Cooling Loops, Phase I |
Completed
|
— |
Heat Acquisition |
Jet Propulsion Laboratory |
| Superpressure Tow Balloon for Extending Durations and Modifying Trajectories of High Altitude Balloon Systems, Phase I |
Completed
|
— |
In-Space Propellant Storage and Use |
Goddard Space Flight Center |
| Miniature Spatial Heterodyne Time-Resolved Raman Spectrometer (SHRS) for Planetary Surface and Subsurface Boreholes Mineralogy |
Completed
|
3 |
Lasers |
— |
| Cryogenic Piezo Actuators for Lightweight, Large Aperture, Deployable Membrane Mirrors, Phase I |
Completed
|
— |
Mirror Systems |
Jet Propulsion Laboratory |
| AreaAdvisor: Spatial, Real-Time Resource Intelligence, Phase I |
Completed
|
— |
Activity and Resource Planning and Scheduling |
Kennedy Space Center |
| An Autonomous Wireless Instrumentation Network for Antarctic Research, Phase II |
Completed
|
— |
Food Production, Processing, and Preservation |
Goddard Space Flight Center |
| In-Flight Microbial Monitor |
Completed
|
6 |
Air, Water, Microbial, and Acoustic Sensors |
Kennedy Space Center |
| Microwave Powered Gravitationally Independent Medical Grade Water Generation, Phase II |
Completed
|
— |
Remediation |
Glenn Research Center |
| Carbon Foam Self-Heated Tooling for Out-of-Autoclave Composites Manufacturing, Phase I |
Completed
|
— |
Manufacturing Processes |
Ames Research Center |
| Infrared and Near Infrared Spectroscopy of Astrophysical Molecules |
Completed
|
— |
Cryogenic/Thermal Systems |
— |
| Radiation Target Area Sample Environmental Chamber (RTASEC), Phase I |
Completed
|
— |
Radiation Transport and Risk Modeling |
Johnson Space Center |
| The cryogenic evaluation of typical and experimental filament winding materials, Phase I |
Completed
|
— |
Radiation-Hardened Extreme-Environment Components and Implementations |
Marshall Space Flight Center |
| Shielded ADR Magnets For Space Applications, Phase II |
Completed
|
— |
Protection Systems |
Goddard Space Flight Center |
| Spacecraft Thermal Protection Systems (TPS) Based on Polybenzoxazole (PBO) With Unique UV, Atomic-O and Solar Wind Protective Coatings, Phase I |
Completed
|
— |
Coatings |
Ames Research Center |
| Cryogenic Cooling System for Zero-Venting Storage of Supercritical Air Packs, Phase I |
Completed
|
— |
In-Space Propellant Storage and Use |
Kennedy Space Center |
| FCA Rerouting DST, Phase I |
Completed
|
— |
Traffic Management Concepts |
Ames Research Center |
| Vehicle Interior Noise Prediction Using Energy Finite Element Analysis, Phase I |
Completed
|
— |
Vibroacoustics |
Langley Research Center |
| Optical Navigation System, Phase I |
Completed
|
— |
Onboard Navigation Algorithms |
Goddard Space Flight Center |
| Unified Framework for Graphical Authoring and Visual Debugging of PLEXIL, SCL and PRL Programs, Phase I |
Completed
|
2 |
Frameworks, Languages, Tools, and Standards |
Ames Research Center |
| EGLEAN: A Modeling and Analysis Tool for Error-Tolerant Design, Phase I |
Completed
|
— |
Food Production, Processing, and Preservation |
Ames Research Center |
| Smart Skins and Tactile-Feedback Motion Control for Robotic Manipulators, Phase II |
Completed
|
— |
Dexterous Manipulation |
Johnson Space Center |
| Lightweight and Energy Efficient Heat Pump, Phase II |
Completed
|
— |
In-Space Propellant Storage and Use |
Jet Propulsion Laboratory |
| Flexible High-Barrier Polymers for Food Packaging, Phase II |
Completed
|
— |
Flexible Material Systems |
Johnson Space Center |
| Fast Low Power ADC with Integrated Digital Data Processor, Phase I |
Completed
|
— |
Data Acquisition Systems |
Goddard Space Flight Center |
| Validation of a Fine Water Mist Fire Extinguisher (T0010-P) (FWM PFE) |
Completed
|
— |
Fire Detection, Suppression, and Recovery |
— |
| Lightweight Auto-Inflating Self-Rigidizing Booms, Phase I |
Completed
|
— |
Food Production, Processing, and Preservation |
Langley Research Center |
| Revolutionary Wake Hazard Assessment Tool, Phase I |
Completed
|
— |
Traffic Management Concepts |
Ames Research Center |
| Flexible Transpiration Cooled Thermal Protection System for Inflatable Atmospheric Capture and Entry Systems, Phase I |
Completed
|
— |
Thermal Protection Materials |
Armstrong Flight Research Center |
| Multi-Element Lean Direct Injection Combustor Module, Phase I |
Completed
|
— |
Alternative Low-Carbon Jet Fuel |
Glenn Research Center |
| Dust as a Working Fluid for Heat Transfer |
Completed
|
2 |
Particulate Contamination Prevention and Mitigation |
Kennedy Space Center |
| Dynamic Science Data Services for Display, Analysis and Interaction in Widely-Accessible, Web-Based Geospatial Platforms, Phase II |
Completed
|
— |
Intelligent Data Understanding |
Stennis Space Center |
| Fast Responding PSP for Rotorcraft Aerodynamic Investigations, Phase II |
Completed
|
— |
Tests, Tools, and Methods |
Langley Research Center |
| Open System of Agile Ground Stations, Phase I |
Completed
|
— |
Training |
Ames Research Center |
| Triaxial Swirler Liquid Injector Development, Phase II |
Completed
|
— |
Gels |
Marshall Space Flight Center |
| A 4-Dimensional Lightning Mapper, Phase I |
Completed
|
— |
Food Production, Processing, and Preservation |
Marshall Space Flight Center |
| Damage Adaptation Using Integrated Structural, Propulsion, and Aerodynamic Control, Phase I |
Completed
|
— |
Fault Response |
Langley Research Center |
| Ultra-low Noise, High Bandwidth, 1550nm HgCdTe APD, Phase II |
Completed
|
— |
Detectors and Focal Planes |
Jet Propulsion Laboratory |