Search NASA's TechPort inventory — every technology R&D project the agency has tracked, active and completed. Harvested gradually in the background (TechPort only exposes one project per API call, ~21,000 total), so the list grows over time rather than all at once.
What's active and early-stage — where getting involved could matter →
21,172 projects harvested so far — page 84 of 424.
| Title | Status | TRL | Technology area | Lead organization | Last updated | Potential ⓘ |
|---|---|---|---|---|---|---|
| Space-SDR: An FPGA-Based Software Defined Radio, Phase I | Completed | — | Informatics and Decision Support Systems | Johnson Space Center | 2025-01-27 | — |
| Improving Test Operations Through Scalable Video Processing on Computer Clusters, Phase II | Completed | — | Measurement and Control | Stennis Space Center | 2025-01-27 | — |
| Terahertz Quantum Cascade Laser-Based Sensors for Hypersonic Flows (7275-020), Phase II | Completed | — | Field and Particle Detectors | Ames Research Center | 2025-01-27 | — |
| Clean Tech Open | Completed | — | Food Production, Processing, and Preservation | — | 2025-01-27 | — |
| High-Bandwidth Hybrid Sensor (HYSENS), Phase II | Completed | — | Navigation Sensors | Jet Propulsion Laboratory | 2025-01-27 | — |
| Surface-Mount Rotor Motion Sensing System, Phase I | Completed | — | Measurement and Control | Ames Research Center | 2025-01-27 | — |
| Miniaturized Water Recovery System for Advanced Life Support Systems, Phase I | Completed | — | Decompression Sickness Mitigation | Kennedy Space Center | 2025-01-27 | — |
| Range Surveillance Using Radio Interferometry and TDOA Techniques, Phase I | Completed | — | Atmospheric Characterization and Mitigation | Kennedy Space Center | 2025-01-27 | — |
| Aluminum/Alumina Based Metal Matrix Composites from Nanometer Powder, Phase I | Completed | — | Food Production, Processing, and Preservation | Marshall Space Flight Center | 2025-01-27 | — |
| A Real-Time Monitor to Predict Loss of Control due to Pilot-Induced Oscillations, Phase II | Completed | — | Food Production, Processing, and Preservation | Armstrong Flight Research Center | 2025-01-27 | — |
| Foam-Reinforced Polymer Matrix Composite Radiation Shields, Phase I | Completed | — | Protection Systems | Marshall Space Flight Center | 2025-01-27 | — |
| Space Qualified Non-Destructive Evaluation and Structural Health Monitoring Technology, Phase II | Completed | — | Reliability and Sustainment | Langley Research Center | 2025-01-27 | — |
| ZEUS-DO: A Design Oriented CFD-Based Unsteady Aerodynamic Capability for Flight Vehicle Multidisciplinary Configuration Shape Optimization, Phase II | Completed | — | Aeroelasticity | Langley Research Center | 2025-01-27 | — |
| Integrated Spatial Filter Array, Phase I | Completed | — | Detectors and Focal Planes | Goddard Space Flight Center | 2025-01-27 | — |
| Adaptive Optics System Based on a Compact Liquid Crystal Wavefront Corrector, Phase II | Completed | — | Food Production, Processing, and Preservation | Goddard Space Flight Center | 2025-01-27 | — |
| Resilient Space-Qualified Non-Destructive Evaluation Miniature System by Microma, Phase I | Completed | — | Food Production, Processing, and Preservation | Langley Research Center | 2025-01-27 | — |
| Parallel Detection of Multiple Biomarkers During Spaceflight, Phase I | Completed | — | Monitoring Technology | Ames Research Center | 2025-01-27 | — |
| Metal Mesh Filters for Terahertz Receivers, Phase II | Completed | — | Detectors and Focal Planes | Jet Propulsion Laboratory | 2025-01-27 | — |
| A Renewed Approach for Large Eddy Simulation of Complex Geometries, Phase II | Completed | — | Integrated Modeling and Simulation for EDL | Glenn Research Center | 2025-01-27 | — |
| Space Compatible Radar Absorbing Materials, Phase I | Completed | — | Lightweight Structural Materials | Jet Propulsion Laboratory | 2025-01-27 | — |
| Elastomeric Dampers derived from First-Principles-Based Analytical Simulation, Phase II | Completed | — | Integrated Modeling and Simulation for EDL | Ames Research Center | 2025-01-27 | — |
| Solid Oxide Fuel Cell/Turbine Hybrid Power System for Advanced Aero-propulsion and Power, Phase I | Completed | — | Electrochemical Storage: Fuel Cells | Glenn Research Center | 2025-01-27 | — |
| WGM Resonators for Proteomic Analysis, Phase I | Completed | — | Alternative Low-Carbon Jet Fuel | Marshall Space Flight Center | 2025-01-27 | — |
| Efficient Thermally Stable Spectral Control Filters for Thermophotovoltaics, Phase I | Completed | — | Resource Acquisition, Isolation, and Preparation | Glenn Research Center | 2025-01-27 | — |
| Flow-Angle and Airspeed Sensor System (FASS) Using Flush-Mounted Hot-Films, Phase II | Completed | — | Aerodynamics | Armstrong Flight Research Center | 2025-01-27 | — |
| Simulation Environment for CubeSat Hardware-In-The-Loop Test Bed | Completed | 2 | Testing and Evaluation | Goddard Space Flight Center | 2025-01-27 | — |
| Quantum Calorimeters Based on HgCdTe Alloys, Phase II | Completed | — | Detectors and Focal Planes | Goddard Space Flight Center | 2025-01-27 | — |
| Thermo-Acoustic Convertor for Space Power, Phase I | Completed | — | Dynamic Energy Conversion | Glenn Research Center | 2025-01-27 | — |
| Lightweight and Energy Efficient Heat Pump, Phase I | Completed | — | Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors | Jet Propulsion Laboratory | 2025-01-27 | — |
| Smart Crucibles and Heat Pipes, Phase II | Completed | — | Heat Rejection and Storage | Marshall Space Flight Center | 2025-01-27 | — |
| A Hardware/Software Design Environment for Reconfigurable Communication Systems, Phase I | Completed | — | Informatics and Decision Support Systems | Glenn Research Center | 2025-01-27 | — |
| Optical Relative Attitude Sensor for Short-Range Navigation, Phase I | Completed | — | Radiation-Hardened Extreme-Environment Components and Implementations | Johnson Space Center | 2025-01-27 | — |
| High Operating Temperature, Radiation-Hard MIM Thermophotovoltaic Converters, Phase I | Completed | — | Measurement and Control | Glenn Research Center | 2025-01-27 | — |
| Advanced Pumps and Cold Plates for Two-Phase Cooling Loops, Phase I | Completed | — | Heat Acquisition | Jet Propulsion Laboratory | 2025-01-27 | — |
| Superpressure Tow Balloon for Extending Durations and Modifying Trajectories of High Altitude Balloon Systems, Phase I | Completed | — | In-Space Propellant Storage and Use | Goddard Space Flight Center | 2025-01-27 | — |
| Miniature Spatial Heterodyne Time-Resolved Raman Spectrometer (SHRS) for Planetary Surface and Subsurface Boreholes Mineralogy | Completed | 3 | Lasers | — | 2025-01-27 | — |
| Cryogenic Piezo Actuators for Lightweight, Large Aperture, Deployable Membrane Mirrors, Phase I | Completed | — | Mirror Systems | Jet Propulsion Laboratory | 2025-01-27 | — |
| AreaAdvisor: Spatial, Real-Time Resource Intelligence, Phase I | Completed | — | Activity and Resource Planning and Scheduling | Kennedy Space Center | 2025-01-27 | — |
| An Autonomous Wireless Instrumentation Network for Antarctic Research, Phase II | Completed | — | Food Production, Processing, and Preservation | Goddard Space Flight Center | 2025-01-27 | — |
| In-Flight Microbial Monitor | Completed | 6 | Air, Water, Microbial, and Acoustic Sensors | Kennedy Space Center | 2025-01-27 | — |
| Microwave Powered Gravitationally Independent Medical Grade Water Generation, Phase II | Completed | — | Remediation | Glenn Research Center | 2025-01-27 | — |
| Carbon Foam Self-Heated Tooling for Out-of-Autoclave Composites Manufacturing, Phase I | Completed | — | Manufacturing Processes | Ames Research Center | 2025-01-27 | — |
| Infrared and Near Infrared Spectroscopy of Astrophysical Molecules | Completed | — | Cryogenic/Thermal Systems | — | 2025-01-27 | — |
| Radiation Target Area Sample Environmental Chamber (RTASEC), Phase I | Completed | — | Radiation Transport and Risk Modeling | Johnson Space Center | 2025-01-27 | — |
| The cryogenic evaluation of typical and experimental filament winding materials, Phase I | Completed | — | Radiation-Hardened Extreme-Environment Components and Implementations | Marshall Space Flight Center | 2025-01-27 | — |
| Shielded ADR Magnets For Space Applications, Phase II | Completed | — | Protection Systems | Goddard Space Flight Center | 2025-01-27 | — |
| Spacecraft Thermal Protection Systems (TPS) Based on Polybenzoxazole (PBO) With Unique UV, Atomic-O and Solar Wind Protective Coatings, Phase I | Completed | — | Coatings | Ames Research Center | 2025-01-27 | — |
| Cryogenic Cooling System for Zero-Venting Storage of Supercritical Air Packs, Phase I | Completed | — | In-Space Propellant Storage and Use | Kennedy Space Center | 2025-01-27 | — |
| FCA Rerouting DST, Phase I | Completed | — | Traffic Management Concepts | Ames Research Center | 2025-01-27 | — |
| Vehicle Interior Noise Prediction Using Energy Finite Element Analysis, Phase I | Completed | — | Vibroacoustics | Langley Research Center | 2025-01-27 | — |
lastUpdated date for the project. "Recently harvested" instead sorts by when we pulled the record into our database, which clusters within the initial harvest window and is far less meaningful — prefer "Recently updated (NASA)".curl -sS "https://devops.majbase.com/nasa-tech-projects/api?q=laser&status=Active&sort=trl&page=1"Returns {"rows": [...], "total", "page", "pages"}, or {"error": "..."} if temporarily unavailable. All query params are optional.