Search NASA's TechPort inventory — every technology R&D project the agency has tracked, active and completed. Harvested gradually in the background (TechPort only exposes one project per API call, ~21,000 total), so the list grows over time rather than all at once.
What's active and early-stage — where getting involved could matter →
21,172 projects harvested so far — page 103 of 424.
| Title | Status | TRL | Technology area | Lead organization | Last updated | Potential ⓘ |
|---|---|---|---|---|---|---|
| Advanced Ionic Liquid Monopropellant for Payload Ascent Vehicles, Phase I | Completed | — | Automated Exascale Software Development Toolset | Armstrong Flight Research Center | 2025-01-27 | — |
| Low-Cost, Space-Worthy, Read-Out Electronics For Transition-Edge Sensors | Completed | 3 | Detectors and Focal Planes | Goddard Space Flight Center | 2025-01-27 | — |
| A Hybrid End-to-End Architecture that uses Model- and Rule-Based Inferencing, Phase II | Completed | — | High-Performance Processors | Ames Research Center | 2025-01-27 | — |
| Computational Tool for Kinetic Modeling of Non-Equilibrium Multiphase Flows in Ablation, Phase I | Completed | 2 | Integrated Modeling and Simulation for EDL | Armstrong Flight Research Center | 2025-01-27 | — |
| AUTOMATED LEARNING FOR REAL-TIME EXPERT SYSTEM IN MONTORING AND CONTROL, Phase II | Completed | — | Food Production, Processing, and Preservation | Kennedy Space Center | 2025-01-27 | — |
| Ceramic Heat Exchangers and Chemical Reactors with Micro-Scale Features for In-Situ Resource Processing, Phase I | Completed | — | Manufacturing Processes | Johnson Space Center | 2025-01-27 | — |
| AlN Based Extreme Ultraviolet (EUV) Detectors, Phase I | Completed | — | Detectors and Focal Planes | Goddard Space Flight Center | 2025-01-27 | — |
| A Velocity-Control Framework for Kinematically Redundant Manipulators, Phase I | Completed | — | Food Production, Processing, and Preservation | Johnson Space Center | 2025-01-27 | — |
| Novel Medical Diagnostic Instrument based on Real-time Breath Analysis, Phase II | Completed | — | Food Production, Processing, and Preservation | Glenn Research Center | 2025-01-27 | — |
| ATLAST: Optical Systems Engineering & Development | Completed | 1 | Observatories | Goddard Space Flight Center | 2025-01-27 | — |
| Thermophotovoltaic and Thermionic Power Systems with Film Concentrators, Phase I | Completed | — | Static Energy Conversion | Marshall Space Flight Center | 2025-01-27 | — |
| Cognitive Modeling for Closed-Loop Task Mitigation, Phase I | Completed | 3 | Reliability and Sustainment | Langley Research Center | 2025-01-27 | — |
| A Data Abstraction Architecture for Spacecraft Autonomy, Phase II | Completed | — | Data Acquisition Systems | Ames Research Center | 2025-01-27 | — |
| Portable Gene Expression Array Reader for NASA Applications, Phase II | Completed | — | Food Production, Processing, and Preservation | Marshall Space Flight Center | 2025-01-27 | — |
| High-Frequency Low-Temperature Regenerative Heat Exchangers, Phase I | Completed | — | Electrothermal Propulsion | Jet Propulsion Laboratory | 2025-01-27 | — |
| Nanopowder Synthesis in a Microgravity Environment, Phase II | Completed | — | Food Production, Processing, and Preservation | Marshall Space Flight Center | 2025-01-27 | — |
| In-Service Aircraft Transmission Life Modeling for Improved Flight Safety, Phase I | Completed | — | Distribution and Transmission | Glenn Research Center | 2025-01-27 | — |
| 600 Volt Stretched Lens Array for Solar Electric Propulsion, Phase II | Completed | — | Photovoltaic Electrical Power | Glenn Research Center | 2025-01-27 | — |
| Power for Vehicle Embedded MEMS Sensors, Phase I | Completed | — | Above-Surface Mobility | Langley Research Center | 2025-01-27 | — |
| Building Blocks for the Rapid Development of Parallel Simulations, Phase I | Completed | — | Tools and Methodologies for Software Design and Development | Ames Research Center | 2025-01-27 | — |
| A 32x32 Direct Hybrid Germanium Photoconductor Array with CTIA Readout Multiplexer, Phase I | Completed | — | Detectors and Focal Planes | Jet Propulsion Laboratory | 2025-01-27 | — |
| Novel Advancements in Internet Based Real-Time Data Technologies, Phase I | Completed | — | Food Production, Processing, and Preservation | Marshall Space Flight Center | 2025-01-27 | — |
| L and P Band MMIC T/R Module, Phase II | Completed | — | Innovative RF Technologies | Jet Propulsion Laboratory | 2025-01-27 | — |
| PASSIVE WIRELESS MULTI-SENSOR TEMPERATURE AND PRESSURE SENSING SYSTEM USING ACOUSTIC WAVE DEVICES, Phase I | Completed | — | Test Instruments and Sensors | Kennedy Space Center | 2025-01-27 | — |
| LVIS Integration onto Global Hawk | Completed | 6 | Microwave, Millimeter Waves, and Submillimeter Waves | NASA Headquarters | 2025-01-27 | — |
| Rectified Continuous Flow Loop for Thermal Control of Large Deployable Structures and Distributed Loads, Phase I | Completed | — | Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors | Jet Propulsion Laboratory | 2025-01-27 | — |
| Piezo-Hydraulic Hybrid Pump for Flight Control, Phase I | Completed | — | Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors | Armstrong Flight Research Center | 2025-01-27 | — |
| Aircraft Based Imaging Probe for the Study of Icing Environments, Phase I | Completed | — | Engine Icing | Glenn Research Center | 2025-01-27 | — |
| Smart Multifunction Antenna for Lunar/Planetary Surface Network, Phase I | Completed | — | Innovative Antennas | Glenn Research Center | 2025-01-27 | — |
| Adaptive Intelligent Ventilation Noise Control, Phase I | Completed | — | Aeroacoustics | Johnson Space Center | 2025-01-27 | — |
| Reconfigurable EVA Radio with Built-In Navigation Capability, Phase I | Completed | — | State Estimation | Johnson Space Center | 2025-01-27 | — |
| Finite Element Models for Electron Beam Freeform Fabrication Process, Phase I | Completed | — | Computational Materials | Johnson Space Center | 2025-01-27 | — |
| Aircraft Based Imaging Probe for the Study of Icing Environments, Phase II | Completed | — | Engine Icing | Glenn Research Center | 2025-01-27 | — |
| System and Component Software Specification, Run-time Verification and Automatic Test Generation, Phase I | Completed | — | Activity and Resource Planning and Scheduling | Ames Research Center | 2025-01-27 | — |
| Active Flow Control with Adaptive Design Techniques for Improved Aircraft Safety, Phase I | Completed | — | Propulsion Flowpath and Interactions | Armstrong Flight Research Center | 2025-01-27 | — |
| Cost Effective On Demand Flow Control Shape Memory Alloy Actuators, Phase II | Completed | — | Smart Materials | Langley Research Center | 2025-01-27 | — |
| A Medipix-Based Small Personal Space Radiation Dosimeter, Phase I | Completed | — | Detectors and Focal Planes | Johnson Space Center | 2025-01-27 | — |
| Electronic Correlated Noise Calibration Standard for Interferometric and Polarimetric Microwave Radiometers, Phase I | Completed | — | Spectrum Efficiency | Goddard Space Flight Center | 2025-01-27 | — |
| In Situ Guided Wave Structural Health Monitoring System, Phase I | Completed | — | Reliability and Sustainment | Glenn Research Center | 2025-01-27 | — |
| Dynamic Science Data Services for Display, Analysis and Interaction in Widely-Accessible, Web-Based Geospatial Platforms, Phase I | Completed | — | Exascale Supercomputer File System | Stennis Space Center | 2025-01-27 | — |
| Cockpit-based Wake Vortex Visualization, Phase I | Completed | — | Traffic Management Concepts | Langley Research Center | 2025-01-27 | — |
| Novel Tools and Test Techniques for the Evaluation of Aeroservoelastic Free-Play, Phase I | Completed | 3 | Aeroelasticity | Armstrong Flight Research Center | 2025-01-27 | — |
| Vehicle Interior Noise Prediction Using Energy Finite Element Analysis, Phase II | Completed | — | Vibroacoustics | Langley Research Center | 2025-01-27 | — |
| Computational Modeling in Support of High Altitude Testing Facilities, Phase I | Completed | — | Mechanical and Structural Integrity Testing | Stennis Space Center | 2025-01-27 | — |
| Automated Parallel Computing Tools for Multicore Machines and Clusters, Phase I | Completed | — | Informatics and Decision Support Systems | Ames Research Center | 2025-01-27 | — |
| Analysis and Mitigation of Increased Traffic Impacts on the Environment (AMITIE), Phase I | Completed | — | Integrated Systems and Ancillary Technologies | Ames Research Center | 2025-01-27 | — |
| Radiation Tolerant Reconfigurable/Reprogrammable 802.16 Communication System, Phase I | Completed | — | Sensing and Perception for Autonomous Systems | Glenn Research Center | 2025-01-27 | — |
| Efficient Space Hardy Thermoelectric Materials with Broad Temperature Range, Phase II | Completed | — | Materials for Electrical Power Generation, Energy Storage, Power Distribution, and Electrical Machines | Johnson Space Center | 2025-01-27 | — |
| RAP Figuring Slumped Mirrors to Remove Mid-Spatial Frequency Errors, Phase II | Completed | — | Mirror Systems | Goddard Space Flight Center | 2025-01-27 | — |
| FCAPD Protective Coating for Space Tethers, Phase I | Completed | — | Electromagnetic Tethers | Marshall Space Flight Center | 2025-01-27 | — |
lastUpdated date for the project. "Recently harvested" instead sorts by when we pulled the record into our database, which clusters within the initial harvest window and is far less meaningful — prefer "Recently updated (NASA)".curl -sS "https://devops.majbase.com/nasa-tech-projects/api?q=laser&status=Active&sort=trl&page=1"Returns {"rows": [...], "total", "page", "pages"}, or {"error": "..."} if temporarily unavailable. All query params are optional.