Search NASA's TechPort inventory — every technology R&D project the agency has tracked, active and completed. Harvested gradually in the background (TechPort only exposes one project per API call, ~21,000 total), so the list grows over time rather than all at once.
What's active and early-stage — where getting involved could matter →
21,172 projects harvested so far — page 107 of 424.
| Title | Status | TRL | Technology area | Lead organization | Last updated | Potential ⓘ |
|---|---|---|---|---|---|---|
| Use Of Dynamic Distortion To Predict And Alleviate Loss Of Control, Phase I | Completed | — | Other Advanced Concepts for Generating and Converting Power | Armstrong Flight Research Center | 2025-01-27 | — |
| Novel Reagent-less Protein Detection Using Nanotechnology, Phase I | Completed | — | Food Production, Processing, and Preservation | Johnson Space Center | 2025-01-27 | — |
| Optical Real-Time Space Radiation Monitor, Phase I | Completed | — | Monitoring Technology | Ames Research Center | 2025-01-27 | — |
| High Resolution Silicon Deformable Mirrors, Phase I | Completed | — | Mirror Systems | Jet Propulsion Laboratory | 2025-01-27 | — |
| Multi-Agent Optical Sensor Chip for Cryogenic Fluids Leak Detection, Phase I | Completed | — | Launch Vehicle Propellant | Glenn Research Center | 2025-01-27 | — |
| Carbon Nanotube-Based Adsorbents for Ultrafine Particulate and Volatile Air Contaminants, Phase I | Completed | — | Atmosphere Revitalization | Johnson Space Center | 2025-01-27 | — |
| Novel Solar Cell Nanotechnology for Improved Efficiency and Radiation Hardness, Phase II | Completed | — | Space Radiation Analysis and Modeling | Glenn Research Center | 2025-01-27 | — |
| Multi-Use Non-Intrusive Flow Characterization System (FCS), Phase I | Completed | — | Measurement and Control | Stennis Space Center | 2025-01-27 | — |
| A Computational Tool for the Prediction of Long Term Stability of Refractory Alloys, Phase I | Completed | — | Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors | Glenn Research Center | 2025-01-27 | — |
| ArC - A Low Cost Scalable Archive Storage Management System, Phase II | Completed | — | Cyber Infrastructure | Goddard Space Flight Center | 2025-01-27 | — |
| Low Erosion Ceramic Composite Liners for Improved Performance of Ablative Rocket Thrust Chambers, Phase I | Completed | — | Cryogenic Propulsion | Marshall Space Flight Center | 2025-01-27 | — |
| An On-Chip Nano-Plasmonics Based Urine Protein Assay Cartridge, Phase I | Completed | — | Reliability and Sustainment | Glenn Research Center | 2025-01-27 | — |
| Modular Distributed Concentrator for Solar Furnace, Phase I | Completed | — | Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors | Glenn Research Center | 2025-01-27 | — |
| Automated Fault Diagnostics, Prognostics, and Recovery in Spacecraft Power Systems, Phase II | Completed | — | Management and Control | Ames Research Center | 2025-01-27 | — |
| Hydrocarbon Rocket Engine Plume Imaging with Laser Induced Incandescence, Phase I | Completed | — | Propulsion Flowpath and Interactions | Stennis Space Center | 2025-01-27 | — |
| Portable Programmable Multifunction Body Fluids Analyzer, Phase I | Completed | — | Medical Diagnosis and Prognosis | Johnson Space Center | 2025-01-27 | — |
| Compact High Power Fiber Laser, Phase I | Completed | — | Lasers | Goddard Space Flight Center | 2025-01-27 | — |
| A Field Reconfigurable Manipulator for Rovers, Phase II | Completed | — | Dexterous Manipulation | Johnson Space Center | 2025-01-27 | — |
| iISCE: InSAR Scientific Computing Environment on the Cloud (iISCE) | Completed | 6 | Intelligent Data Understanding | NASA Headquarters | 2025-01-27 | — |
| Marine ASV Range Surveillance System, Phase I | Completed | — | Range Tracking, Surveillance, and Flight Safety Technologies | Kennedy Space Center | 2025-01-27 | — |
| Multidisciplinary Optimization Object Library, Phase II | Completed | — | Automated Exascale Software Development Toolset | Glenn Research Center | 2025-01-27 | — |
| Load Responsive MLI: Thermal Insulation with High In-Atmosphere and On-Orbit Performance, Phase II | Completed | — | Launch Vehicle Propellant | Goddard Space Flight Center | 2025-01-27 | — |
| Radiation Hard Space Wire Gigabit Ethernet Compatible Transponder, Phase II | Completed | — | High-Speed Onboard Interconnects and Networks | Goddard Space Flight Center | 2025-01-27 | — |
| Acoustic Emission Health Monitoring of Fill Purge COPV's Used in Aerospace and Automotive Applications and Designed for Long Cycle Life | Completed | 3 | Behavioral Health and Performance | White Sands Test Facility | 2025-01-27 | — |
| High-Power, High-Efficiency 1.907nm Diode Lasers, Phase I | Completed | — | Electrical Power Conversion and Regulation | Langley Research Center | 2025-01-27 | — |
| Reliable High Performance Processing System (RHPPS), Phase I | Completed | — | Radiation-Hardened Extreme-Environment Components and Implementations | Goddard Space Flight Center | 2025-01-27 | — |
| Secure Peer-to-Peer Networks for Scientific Information Sharing, Phase I | Completed | — | Information Assurance | Goddard Space Flight Center | 2025-01-27 | — |
| Nanomechanical Water Purification Device, Phase I | Completed | — | Resource Processing for Production of Mission Consumables | Johnson Space Center | 2025-01-27 | — |
| One-Meter Class Drilling for Planetary Exploration, Phase II | Completed | — | Sample Acquisition and Handling | Jet Propulsion Laboratory | 2025-01-27 | — |
| Superconducting Thin-Film Interconnects for Cryogenic Photon Detector Arrays, Phase I | Completed | — | Detectors and Focal Planes | Goddard Space Flight Center | 2025-01-27 | — |
| Magnesium Diboride Superconducting Coils for Electric Propulsion Systems for Large Aircraft, Phase I | Completed | — | Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors | Glenn Research Center | 2025-01-27 | — |
| High Efficiency Quantum Dot III-V Thermophotovoltaic Cell for Space Power, Phase II | Completed | — | Architecture and Design of Autonomous Systems | Glenn Research Center | 2025-01-27 | — |
| Vapor Compressor Driven Hybrid Two-Phase Loop, Phase I | Completed | — | Hybrids | Jet Propulsion Laboratory | 2025-01-27 | — |
| Novel Fabrication of Nano Device for Single DNA/Protein Detection, Phase I | Completed | — | Long-Duration Health | Ames Research Center | 2025-01-27 | — |
| Robust, High Temperature Containment Cartridges for Microgravity, Phase II | Completed | — | Food Production, Processing, and Preservation | Marshall Space Flight Center | 2025-01-27 | — |
| Friction Stir Processing of Cast Superalloys, Phase I | Completed | — | Sustainable Manufacturing | Marshall Space Flight Center | 2025-01-27 | — |
| High Burn Rate Hybrid Fuel for Improved Grain Design, Phase I | Completed | — | Hybrids | Marshall Space Flight Center | 2025-01-27 | — |
| Mutlifunctional Energy Storage-Structure Modules for Advanced Space Structures, Phase I | Completed | — | Innovative and Multifunctional Concepts | Goddard Space Flight Center | 2025-01-27 | — |
| High-Power, High-Efficiency 1.907nm Diode Lasers, Phase II | Completed | — | Lasers | Langley Research Center | 2025-01-27 | — |
| Integrated Large Scale Zonal Meniscus, Phase II | Completed | — | Radiation-Hardened Extreme-Environment Components and Implementations | Jet Propulsion Laboratory | 2025-01-27 | — |
| Method of Cellular Monitoring Using Detection of Autocrine and Paracrine Signals, Phase I | Completed | — | Radiation-Hardened Extreme-Environment Components and Implementations | Ames Research Center | 2025-01-27 | — |
| Friction Stir Processing of Cast Superalloys, Phase II | Completed | — | Sustainable Manufacturing | Marshall Space Flight Center | 2025-01-27 | — |
| To Ensure the Integrity of the Cryogenic Propellant Depot Tank Within the Expected Radiation and Space Debris Environment, Phase I | Completed | — | Integrated Systems and Ancillary Technologies | Marshall Space Flight Center | 2025-01-27 | — |
| Portable, Solid-State Light Sources for Field Radiometric Calibrations, Phase I | Completed | — | Detectors and Focal Planes | Goddard Space Flight Center | 2025-01-27 | — |
| Practical Multi-Disciplinary Analysis Tools for Combustion Devices, Phase I | Completed | — | Integrated Modeling and Simulation for EDL | Marshall Space Flight Center | 2025-01-27 | — |
| Reflexive Aero Structures for Enhanced Survivability, Phase I | Completed | — | Surface Construction and Assembly | Langley Research Center | 2025-01-27 | — |
| Fabrication of Radar Array Antennas Using Large-Area, High-Resolution Lithography-on-Flex, Phase II | Completed | — | Structures and Antennas | Jet Propulsion Laboratory | 2025-01-27 | — |
| Lightweight InP Solar Cells for Space Applications, Phase II | Completed | — | Photovoltaic Electrical Power | Glenn Research Center | 2025-01-27 | — |
| Simulations of Unsteady Effects and Dynamic Responses in Complex Valve Systems, Phase II | Completed | — | Propulsion Flowpath and Interactions | Stennis Space Center | 2025-01-27 | — |
| Constant-Energy Synchronous Probe for Surface Monitoring, Phase I | Completed | — | Planetary Protection | Jet Propulsion Laboratory | 2025-01-27 | — |
lastUpdated date for the project. "Recently harvested" instead sorts by when we pulled the record into our database, which clusters within the initial harvest window and is far less meaningful — prefer "Recently updated (NASA)".curl -sS "https://devops.majbase.com/nasa-tech-projects/api?q=laser&status=Active&sort=trl&page=1"Returns {"rows": [...], "total", "page", "pages"}, or {"error": "..."} if temporarily unavailable. All query params are optional.