| Material Degradation During the Stressed Oxidation of CMCs |
Completed
|
3 |
Materials for Extreme Environments |
University of California-Santa Barbara |
| Phobos L1 Operational Tether Experiment (PHLOTE) |
Completed
|
3 |
Above-Surface Mobility |
Langley Research Center |
| Large Area Topological 2D Materials for Spintronics and Energy Efficient Electronics |
Completed
|
3 |
Materials for Electrical Power Generation, Energy Storage, Power Distribution, and Electrical Machines |
Yale University |
| Real-Time Polymerase Chain Reaction (PCR) Capability in Space |
Completed
|
— |
Sample Handling |
Johnson Space Center |
| Plant-Based Robotics Systems (PBRS-ACO ) |
Completed
|
6 |
Other Robotic Systems |
Lockheed Martin Inc. |
| Anti-Phase Vortex Reduction Control for Rotor Noise Suppression |
Completed
|
4 |
Aeroacoustics |
Ames Research Center |
| Repeatability Evaluation of Direct-Write Printing on Flexible and Three-Dimensional Geometries, Year 4 |
Completed
|
3 |
Digital Transformation Technologies for Manufacturing |
Goddard Space Flight Center |
| Organics and Biological Scanner (OrBis): Standoff, fast, large area line scanner for non-destructive, sensitive, detection of biological and organic materials |
Completed
|
3 |
Planetary Protection |
Langley Research Center |
| Electrochemical membrane reactors for in-situ resource utilization of wastewater in space |
Completed
|
3 |
Water Recovery and Management |
Stanford University |
| Logistics Reduction: Advanced Clothing System (ACS) (LR-ACS) |
Completed
|
4 |
Habitation Systems |
Johnson Space Center |
| Correlated Electromagnetic Levitation Actuator, Year 2 |
Completed
|
2 |
— |
Marshall Space Flight Center |
| Pluto Hop, Skip, and Jump |
Completed
|
3 |
Aerodynamic Decelerators |
Global Aerospace Corporation |
| Raising the Technical Readiness of Germanium Immersion Gratings for a Space-based High-resolution Infrared Spectrometer |
Completed
|
5 |
Optical Components |
Ames Research Center |
| Improvements and Optimization of Analytical Guidance Laws for Low-Thrust Trajectory Design |
Completed
|
3 |
Relative Navigation Aids |
University of Maryland-College Park |
| Modeling and Development of Superconducting Nanowire Single Photon Detectors |
Completed
|
3 |
Detector Development |
California Institute of Technology |
| Precision Spectroscopic Calibration and Next-Generation Millimeter-Wave Spectrometers |
Active
|
2 |
Detectors and Focal Planes |
University of Chicago |
| 3-D Printed Thrust Takeout Structure Challenge, Year 1 |
Completed
|
3 |
Flight and Ground Testing Methodologies |
Stennis Space Center |
| Tensegrity Approaches to In-Space Construction of a 1g Growable Habitat |
Completed
|
2 |
Propulsion, Exhaust, and Propellant Management |
Texas A & M University-College Station |
| Polymide Aerogel as Wire Insulation |
Completed
|
6 |
— |
Glenn Research Center |
| Boron/Graphite Hybrid Composites |
Completed
|
4 |
— |
Marshall Space Flight Center |
| Rad-Tolerant Neuromorphic Processor (RTP) |
Completed
|
— |
— |
Ames Research Center |
| Physics-informed Modeling of Multi-nozzle Plume Physics with Quantifiable Uncertainties from Supersonic Retropropulsion Tests |
Completed
|
4 |
Supersonic Retropropulsion |
Stanford University |
| Rapidly Deployable and Robust Additive Manufacturing Techniques for Structural Materials |
Completed
|
3 |
Resource Processing for Production of Manufacturing, Construction, and Energy Storage Feedstock Materials |
Georgia Institute of Technology-Main Campus |
| Development of Physics-Based Numerical Models for Uncertainty Quantification of Selective Laser Melting Processes |
Completed
|
4 |
Manufacturing Processes |
University of California-Davis |
| Propagation Controlled Solid Fuel-Oxidant Reactions for the Generation of Harvestable Heat |
Completed
|
4 |
Electrochemical Storage: Batteries |
University of Central Florida |
| Time-Synchronized Beacons for Relative UAV Position Determination |
Completed
|
2 |
— |
Langley Research Center |
| Radiation Pressure on Tunable Optical Metamaterials for Propulsion and Steering without Moving Parts |
Completed
|
3 |
Lightweight Concepts |
University of Maryland-College Park |
| Nanocoatings for Wicking of Low Viscosity Cryogens, Year 1 |
Completed
|
3 |
— |
Kennedy Space Center |
| Solar Surfing |
Completed
|
3 |
Thermal Protection Materials |
Kennedy Space Center |
| Space-variant Pancharatnam-Berry Phase Metasurfaces for Segmented Aperture Coronagraphs |
Completed
|
3 |
Remote Sensing Instruments and Sensors |
Jet Propulsion Laboratory |
| Biomaterials out of thin air: in situ, on-demand printing of advanced biocomposites |
Completed
|
3 |
Lightweight Structural Materials |
Ames Research Center |
| R2 Cognitive Computing |
Completed
|
6 |
Learning and Adaptation |
Johnson Space Center |
| Electrostatic Levitation Characterization of Regolith Simulants and IL-Derived Additive Manufacturing Alloys |
Completed
|
2 |
Resource Processing for Production of Manufacturing, Construction, and Energy Storage Feedstock Materials |
Marshall Space Flight Center |
| Versatile Manipulation for Assistive Free-Flyers |
Completed
|
4 |
Dexterous Manipulation |
Columbia University in the City of New York |
| Advanced Scintillating Fiber Technology in High Energy Neutron Spectrometers for Exploration |
Completed
|
4 |
Monitoring Technology |
University of Alabama in Huntsville |
| Increasing scientific access and technology reliability through multi-modal surface and subsurface legged mobility |
Active
|
2 |
Surface Mobility |
University of California-Berkeley |
| High Hydrogen Content Nanostructured Polymer Radiation Protection System |
Completed
|
4 |
Protection Systems |
University of Houston |
| Edge Machine Learning Predictive Anomaly Detection for Autonomous Operations |
Completed
|
5 |
Anomaly Detection |
Stennis Space Center |
| INFLAME optics analysis for direct net flux measurement in the visible spectrum |
Completed
|
3 |
Sensors and Instruments |
Langley Research Center |
| Ultrasensitive Paper-based Biosensors for In-flight Quantification of Key Biomarkers in Saliva |
Completed
|
3 |
Medical Diagnosis and Prognosis |
Washington University in St Louis |
| Interpretable Robotic Manipulation of Deformable Objects |
Completed
|
3 |
Behavior and Intent Prediction |
University of Southern California |
| Quantifying the Value of Resilience in Long-Duration Space Systems |
Completed
|
3 |
Model-Based Systems Engineering |
Massachusetts Institute of Technology |
| Electrodeionization Salt Removal from Water |
Completed
|
4 |
Environmental Control and Life Support Systems and Habitation Systems |
Kennedy Space Center |
| Understanding and Mitigating the Charging Behavior of Next Generation Complex and Active Spacecraft |
Completed
|
3 |
Behavior and Intent Prediction |
University of Michigan-Ann Arbor |
| Small Satellite MagLev 3DOF Test Platform |
Completed
|
— |
Integrated Systems and Ancillary Technologies |
Johnson Space Center |
| Shape Memory Alloy Cryogenic Transfer Coupling for Space Depot Docking Operations Project |
Completed
|
2 |
— |
Glenn Research Center |
| Integrated Control Electronics for Adjustable X-Ray Optics |
Completed
|
4 |
Optical Components |
Pennsylvania State University-Main Campus |
| Super Ball Bot - Structures for Planetary Landing and Exploration |
Completed
|
3 |
Below-Surface Mobility |
Ames Research Center |
| Producing methane and oxygen on Mars using proton-conducting ceramics |
Completed
|
3 |
Resource Processing for Production of Mission Consumables |
Colorado School of Mines |
| Hierarchical Composites with Nanostructured Reinforcement for Multifunctional Aerospace Structures |
Completed
|
3 |
Special Materials |
Massachusetts Institute of Technology |