| Intercalation of Carbon Nanotube Fibers to Improve their Conductivity Project |
Completed
|
3 |
— |
Glenn Research Center |
| Early Detection of Overheating Polytetrafluoroethylene Insulated Wires Project |
Completed
|
5 |
— |
Glenn Research Center |
| Raman Scattering Proof-of-Concept Investigation to Detect Particle Phase in the Propulsion System Lab (PSL) Icing Duct Project |
Completed
|
3 |
— |
Glenn Research Center |
| Green Monopropellant Microtube Combustor for CubeSat Propulsion Project |
Completed
|
5 |
Earth Storable Propellants |
Glenn Research Center |
| Coupled Human-Space Suit Mobility Studies Project |
Completed
|
3 |
Pressure Garment |
Johnson Space Center |
| Direct Energy Conversion for Nuclear Propulsion at Low Specific Mass Project |
Completed
|
4 |
— |
Johnson Space Center |
| Force Curves to Demonstrate Methods to Increase Musculoskeletal Loading with the ARED |
Completed
|
3 |
Prevention and Countermeasures |
Johnson Space Center |
| Chemistry and Thermodynamics of Solid Waste Streams used in Waste-to-Energy (WTE) Systems |
Completed
|
2 |
ECLSS Modeling and Simulation Tools |
Johnson Space Center |
| In-Space Manufacturing Development and Demonstration |
Completed
|
4 |
Manufacturing Processes |
Johnson Space Center |
| Pitch Synchronous Segmentation of Speech Signals |
Completed
|
2 |
Team Preparedness and Training |
Johnson Space Center |
| Q-Thruster Breadboard Campaign |
Completed
|
3 |
Electrostatic Propulsion |
Johnson Space Center |
| Nano-Antenna For Terahertz (THz) Medical Imaging Applications |
Completed
|
3 |
Detectors and Focal Planes |
Johnson Space Center |
| Ionic Monopropellant Compatibility Study |
Completed
|
4 |
Earth Storable Propellants |
Johnson Space Center |
| Brine Recovery in Containment (BRIC) Project, Year 2 |
Completed
|
— |
Water Recovery and Management |
Johnson Space Center |
| Unmanned Microgravity Flight Program |
Completed
|
— |
Prevention and Countermeasures |
Johnson Space Center |
| Textile Strain Gauge for Inflatable Structures Project |
Completed
|
3 |
— |
Johnson Space Center |
| Siri-Like Smart Crew Assistant, Year 1 |
Completed
|
4 |
Maintainability and Supportability |
Johnson Space Center |
| Testbed For Aerothermal Test Technique Development |
Completed
|
3 |
Ground and Flight Test Technologies |
Johnson Space Center |
| Follow-On Shaft Seal Evaluation for Future OMS Engine Series Valve Derivations |
Completed
|
9 |
— |
Johnson Space Center |
| Smart COPVs - Continued Successful Development of JSC IR&D Acoustic Emissions (AE) SHM |
Completed
|
3 |
Nondestructive Inspection, Evaluation, and Root Cause Analysis |
Johnson Space Center |
| Electrospray Ionization for Water Monitoring |
Completed
|
3 |
Air, Water, Microbial, and Acoustic Sensors |
Johnson Space Center |
| Carbon Nanotube Thermal Interface Materials for Enhanced Thermal Management Project |
Completed
|
3 |
Heat Transport |
Jet Propulsion Laboratory |
| Demonstration of 6DOF Arc-mim/mm Control in the FCT Using Proba-3 Metrology and Control System, Year 1 |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| LiAISON: Linked, Autonomous Interplanetary Satellite Orbit Navigation Project |
Completed
|
5 |
Navigation Sensors |
Jet Propulsion Laboratory |
| Total Dose Regeneration of COTS Using a Thermally Controlled Packaging Approach, Year 1 |
Completed
|
4 |
Mechanism-Life-Extension Systems |
Jet Propulsion Laboratory |
| Ultra High-Speed Imaging |
Completed
|
3 |
Detectors and Focal Planes |
Jet Propulsion Laboratory |
| Exploration of the Use of Spiking Detectors to Solve GNC Problems Project |
Completed
|
3 |
Detectors and Focal Planes |
Jet Propulsion Laboratory |
| 100GB Rad Tolerant Solid State Drive (SSD), Year 2 |
Completed
|
5 |
— |
Jet Propulsion Laboratory |
| Amorphous Metals for Opto-Mechanical Fixtures and Mechanisms, Year 1 |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| Micro-Instrument Accommodation Survey Project |
Completed
|
3 |
Mirror Systems |
Jet Propulsion Laboratory |
| Nanofabricated Optomechanical Whispering Gallery Mode Resonators, Year 2 |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| Variable and Adaptive Coded Modulation for Cognitive Networking, Year 2 |
Completed
|
3 |
Cognitive Networking |
Jet Propulsion Laboratory |
| Optics for SIERRA Project |
Completed
|
4 |
— |
Jet Propulsion Laboratory |
| 3D Printed Magnetic-to-Non-magnetic Gradient Alloy Cold Encoder Shafts for Prediction and Control of Magnetic Permeability, Year 1 |
Completed
|
8 |
Tests, Tools, and Methods |
Jet Propulsion Laboratory |
| Graphene for Space Project |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| ARES-V Adaptive Resolution Stereo-Vision |
Completed
|
6 |
— |
Jet Propulsion Laboratory |
| Next Generation Broadband Grating for Hyperspectral Thermal Infrared Imagers, Year 2 |
Completed
|
4 |
Detectors and Focal Planes |
Jet Propulsion Laboratory |
| Development of Organic FET (OFET)-Based Flexible Integrated Controller for Deformable Mirrors, Year 1 |
Completed
|
3 |
Mirror Systems |
Jet Propulsion Laboratory |
| Miniature Universal Sampling System for Scientific Instruments Project |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| Rapid Advanced Heliocentric Mission Design for L3, L4, L5, NEO Rendezvous, Capture, Sample Return, Year 1 |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| Interplanetary Autonomous Navigation with Pulsars, Year 1 |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| Enabling Ring-Cusp Ion Thruster Technology for NASA Missions, Year 1 |
Completed
|
4 |
Electrostatic Propulsion |
Jet Propulsion Laboratory |
| All-Metal Dual-Polarized W-band Patch Element for Phased Array Antenna Applications, Year 1 |
Completed
|
2 |
Structures and Antennas |
Jet Propulsion Laboratory |
| Retrieving Balloon Data in Flight Project |
Completed
|
4 |
— |
Jet Propulsion Laboratory |
| Enabling Nanosat Mobility and Autonomy for Small Bodies Exploration, Year 1 |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| New Alkali Metal Flow Battery for Terrestrial and Aerospace Energy Storage Applications Project |
Completed
|
3 |
Electrochemical Storage: Batteries |
Jet Propulsion Laboratory |
| Use of heterogeneous regenerators in sub-20K pulse tube applications Project |
Completed
|
4 |
Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors |
Jet Propulsion Laboratory |
| Gradient Alloy for Optical Packaging Project |
Completed
|
3 |
Manufacturing Processes |
Jet Propulsion Laboratory |
| CIF Yagi & Radio Science Project |
Completed
|
3 |
— |
Jet Propulsion Laboratory |
| Amorphous Metals for Opto-Mechanical Fixtures and Mechanisms, Year 2 |
Completed
|
4 |
— |
Jet Propulsion Laboratory |