| Thick-Section PIP Derived CMC Components, Phase II |
Completed
|
— |
Food Production, Processing, and Preservation |
Marshall Space Flight Center |
| Decomposing Nitrous Oxide Thruster using Dielectric Barrier Discharge Project |
Completed
|
2 |
Cold Gas |
Goddard Space Flight Center |
| High Performance Wafer-Based Capillary Electrochromatography, Phase I |
Completed
|
— |
Launch Vehicle Propellant |
Jet Propulsion Laboratory |
| On Orbit Immuno-Based, Label-Free, White Blood Cell Counting System with MicroElectroMechanical Sensor (MEMS) Technology (OILWBCS-MEMS), Phase I |
Completed
|
3 |
Electrochemical Storage: Fuel Cells |
Johnson Space Center |
| Monitoring Microbes in the Spacecraft Environment by Mass Spectrometry of Ribosomal RNA, Phase I |
Completed
|
— |
Remediation |
Marshall Space Flight Center |
| Optimal Path Planning for Formation Flying Applications with Collision Avoidance, Phase I |
Completed
|
— |
GN&C Fault Management, Fault Tolerance, and Autonomy |
Jet Propulsion Laboratory |
| Cost Effective Growth of High Temperature Piezoelectrics for Adaptive Flow Control Actuators, Phase I |
Completed
|
— |
Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors |
Glenn Research Center |
| Reconfigurable, Digital EVA Radio, Phase II |
Completed
|
— |
Informatics and Decision Support Systems |
Johnson Space Center |
| Application of a Fused Carbon Nanomaterial Filter for Lunar Dust Abatement, Phase I |
Completed
|
— |
Particulate Contamination Prevention and Mitigation |
Johnson Space Center |
| UAV Flight Instrumentation for the In-Situ Measurement of Aerosol Optical Properties, Phase I |
Completed
|
— |
Lasers |
Ames Research Center |
| Rule-Based Multidisciplinary Tool for Unsteady Reacting Real-Fluid Flows, Phase II |
Completed
|
— |
Integrated Modeling and Simulation for EDL |
Marshall Space Flight Center |
| Non-Destructive Detection and Separation of Radiation Damaged Cells in Miniaturized, Inexpensive Device, Phase II |
Completed
|
— |
Radiation Transport and Risk Modeling |
Ames Research Center |
| Advanced 3D Human Simulation Components with Thermal/Haptic Feedback and Tissue Deformation, Phase II |
Completed
|
— |
Informatics and Decision Support Systems |
Johnson Space Center |
| Multi-Disciplinary Multi-Fidelity Design Environment, Phase II |
Completed
|
— |
Tools and Methodologies for Vehicle and Concept Definition Activities |
Langley Research Center |
| A Nanoparticulate Photocatalytic Filter for Removal of Trace Contaminant Gases, Phase II |
Completed
|
— |
Atmosphere Revitalization |
Johnson Space Center |
| 128x128 Ultra-High Density Optical Interconnect, Phase II |
Completed
|
— |
Measurement and Control |
Jet Propulsion Laboratory |
| Low-Cost Fabrication of an Integrated, Self-Sufficient MEMS Skin, Phase I |
Completed
|
— |
Food Production, Processing, and Preservation |
Langley Research Center |
| Fuel/Oxidizer Injector Modeling in Sub- and Super-Critical Regimes for Deep Throttling Cryogenic Engines, Phase I |
Completed
|
— |
Cryogenic Analysis, Safety, and Properties |
Marshall Space Flight Center |
| Variable Emissivity Electrochromics Using Ionic Electrolytes and Low Solar Absorptance Coatings, Phase I |
Completed
|
— |
Photovoltaic Electrical Power |
Goddard Space Flight Center |
| Plume Diagnostics for Combustion Stability, Phase I |
Completed
|
— |
Cryogenic Analysis, Safety, and Properties |
Stennis Space Center |
| TEPC Microdosimeter for LEO and Beyond, Phase I |
Completed
|
— |
Detectors and Focal Planes |
Ames Research Center |
| Practical Multi-Disciplinary Analysis Tools for Combustion Devices, Phase II |
Completed
|
— |
Collaborative Science and Engineering |
Marshall Space Flight Center |
| Magnetic Shape Memory Alloy Actuator for Instrument Applications |
Completed
|
1 |
Smart Materials |
Goddard Space Flight Center |
| Reflight of the Stratospheric TeraHertz Observatory: STO-2, University of Maryland Co-I |
Completed
|
— |
Microwave, Millimeter Waves, and Submillimeter Waves |
— |
| Real Time Monitoring and Test Vector Generation for Improved Flight Safety, Phase II |
Completed
|
— |
Fire Detection, Suppression, and Recovery |
Langley Research Center |
| Highly-Integrated, Reconfigurable, Large-Area, Flexible Radar Antenna Arrays, Phase I |
Completed
|
— |
Innovative Antennas |
Glenn Research Center |
| Quantum Dot Spectrum Converters for Enhanced High Efficiency Photovoltaics, Phase I |
Completed
|
— |
Photovoltaic Electrical Power |
Glenn Research Center |
| Hyperspectral Polarimeter for Monitoring Balloon Strain, Phase I |
Completed
|
— |
TPS Instrumentation |
Goddard Space Flight Center |
| Milliwatt Radioisotope Stirling Convertor, Phase I |
Completed
|
— |
Dynamic Energy Conversion |
Glenn Research Center |
| Hypersonic Control Modeling and Simulation Tool for Lifting Towed Ballutes, Phase I |
Completed
|
— |
Hypersonic Decelerators |
Langley Research Center |
| Thermally Resistant Catalytic System for Monopropellant Ignition, Phase II |
Completed
|
— |
Food Production, Processing, and Preservation |
Glenn Research Center |
| Range-Based Auto-Focus, Phase I |
Completed
|
— |
Reliability and Sustainment |
Kennedy Space Center |
| Space-Qualifiable 1064 nm Fiber Based Transmitter for Long Range Optical Communications, Phase I |
Completed
|
— |
Lasers |
Jet Propulsion Laboratory |
| Fundamental Hyperelastic Material Study |
Completed
|
3 |
Flexible Material Systems |
Armstrong Flight Research Center |
| MMIC Cavity Oscillator at 50 and 94 GHz (2007040), Phase II |
Completed
|
— |
Innovative RF Technologies |
Goddard Space Flight Center |
| Fully Integral, Flexible Composite Driveshaft, Phase II |
Completed
|
— |
Recycle, Reuse, and Repurpose Processes |
Glenn Research Center |
| Long-Life, Oil-Free Polymeric, Multi-Roller Traction Drives for Planetary Vehicle Surface Exploration, Phase I |
Completed
|
— |
Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors |
Glenn Research Center |
| Micro-Sampling Probe and Programmable Thermal Desorption/Pyrolysis Inlet System, Phase II |
Completed
|
— |
Measurement and Control |
Jet Propulsion Laboratory |
| LOX Olefin Rocket Propulsion for Deep Space, Phase I |
Completed
|
— |
Static Energy Conversion |
Marshall Space Flight Center |
| Unmanned Aerial System and Spaceflight Microwave Radiometers’ Radio-Frequency Interference Direct Detection and Science Data Recovery Based on the Hilbert-Huang Transform for Two Dimensions |
Completed
|
6 |
Spectrum Efficiency |
Goddard Space Flight Center |
| Power System Electronics (PSE) Development for SmallSat Technology |
Completed
|
2 |
Electronics |
Goddard Space Flight Center |
| Non-Lubricated Diamond-Coated Bearings Reinforced by Carbon Fibers to Work in Lunar Dust, Phase II |
Completed
|
— |
Particulate Contamination Prevention and Mitigation |
Glenn Research Center |
| Miniaturized, Multi-Analyte Sensor Array for the Automated Monitoring of Major Atmospheric Constituents in Spacecraft Environment, Phase I |
Completed
|
— |
Commodity Recovery |
Jet Propulsion Laboratory |
| High Performance Wafer-Based Capillary Electrochromatography, Phase II |
Completed
|
— |
Launch Vehicle Propellant |
Jet Propulsion Laboratory |
| Autonomous, Cryogenic Leak Detector for Improving Launch Site Operations, Phase I |
Completed
|
— |
Launch Vehicle Propellant |
Kennedy Space Center |
| Simulating Emerging Space Industries with Agent-Based Modeling, Phase I |
Completed
|
— |
Integrated Modeling and Simulation for EDL |
Marshall Space Flight Center |
| Risk Analysis Using Modeling and Simulation of Organizational Structure and Behavior, Phase I |
Completed
|
— |
Tools and Methodologies for Performing Systems Analysis |
Langley Research Center |
| A High Fidelity Computational Tool for Modeling Thermal Vent Systems in Cryogenic Tanks, Phase I |
Completed
|
— |
In-Space Propellant Storage and Use |
Glenn Research Center |
| A Low Cost, Electronically Scanned Array (ESA) Antenna Technology for Aviation Hazard Detection and Avoidance, Phase I |
Completed
|
— |
Innovative Antennas |
Langley Research Center |
| Multifunctional Polymers Incorporating High-Z Neutron-Capture Nanoparticles, Phase I |
Completed
|
— |
Innovative and Multifunctional Concepts |
Langley Research Center |