| Novel Catalyst Development for Synthetic Endothermic Fuels, Phase I |
Completed
|
— |
Lasers |
Glenn Research Center |
| Electrochemical Hydrogen Peroxide Generator for Multiple Applications in Space, Phase I |
Completed
|
— |
Water Recovery and Management |
Johnson Space Center |
| High-Performance, Radiation-Hard, 2-D, Near-Infrared, Avalanche Photodiode Arrays, Phase II |
Completed
|
— |
Detector Development |
Goddard Space Flight Center |
| Electrochemical-Driven Fluid Pump for Spacecraft Thermal Control, Phase I |
Completed
|
— |
Heat Rejection and Storage |
Marshall Space Flight Center |
| Foam-in-Place Contaminant Containment System, Phase I |
Completed
|
— |
Sample Handling |
Jet Propulsion Laboratory |
| Quantifiable and Reliable Structural Health Management Systems, Phase II |
Completed
|
— |
Nondestructive Evaluation and Sensors |
Ames Research Center |
| High Resolution Silicon Deformable Mirrors, Phase II |
Completed
|
— |
Mirror Systems |
Jet Propulsion Laboratory |
| Holographic Waveguided See-Through Display, Phase II |
Completed
|
— |
Informatics and Decision Support Systems |
Glenn Research Center |
| Low Cost Phased Array Antenna System, Phase II |
Completed
|
— |
Innovative Antennas |
Goddard Space Flight Center |
| Turbulence Impact Module for ATM Planning and Research, Phase I |
Completed
|
— |
Integrated Modeling, Simulation, and Testing |
Ames Research Center |
| 3D Multi-Channel Networked Visualization System for National LambdaRail, Phase I |
Completed
|
— |
Data Reduction Hardware Systems |
Goddard Space Flight Center |
| 349-nm Source for Direct Detection Measurements of Winds, Phase II |
Completed
|
— |
Measurement and Control |
Goddard Space Flight Center |
| Ultra-Wideband Transceiver for Integrated Communication and Relative Navigation, Phase II |
Completed
|
— |
Optimetrics |
Glenn Research Center |
| Carbon Nanotube Gas Sensor, Phase I |
Completed
|
— |
Extreme Environments Related to Critical System Health Management |
Ames Research Center |
| Multi-Frequency Airborne Radar System for Aircraft Icing Avoidance, Phase II |
Completed
|
— |
Engine Icing |
Glenn Research Center |
| High Pressure Atmospheric Sampling Inlet System for Venus or the Gas Giants, Phase I |
Completed
|
— |
Sample Acquisition and Handling |
Jet Propulsion Laboratory |
| Visible Light Responsive Catalyst for Air & Water Purification (VLR) |
Completed
|
3 |
Certification Methods |
Kennedy Space Center |
| High Resolving Power Volume Diffractive Gratings for 400-2700 nm Spectral Range, Phase II |
Completed
|
— |
Detectors and Focal Planes |
Goddard Space Flight Center |
| Miniaturized Airborne Imaging Central Server System, Phase II |
Completed
|
— |
Relative Navigation Sensors |
Goddard Space Flight Center |
| Programmable High-Rate Multi-Mission Receiver for Space Communications, Phase I |
Completed
|
— |
Cognitive Networking |
Goddard Space Flight Center |
| Network Centric Transponders for Airspace Integration of UAVs, Phase II |
Completed
|
— |
Architectures and Infrastructure |
Ames Research Center |
| Cosmic-ray Shower Detector Focal Plane, Phase I |
Completed
|
— |
Detectors and Focal Planes |
Goddard Space Flight Center |
| Quantifiable and Reliable Structural Health Management Systems, Phase I |
Completed
|
— |
Reliability and Sustainment |
Ames Research Center |
| HgCdTe Infrared Avalanche Photodiode Single Photon Detector Arrays for the LIST and Other Decadal Missions |
Completed
|
4 |
Detectors and Focal Planes |
NASA Headquarters |
| Radiosonde-Borne Cloud Assessment System, Phase I |
Completed
|
— |
Engine Icing |
Glenn Research Center |
| SOI MESFETs for Extreme Environment Electronics, Phase I |
Completed
|
— |
Electronics |
Jet Propulsion Laboratory |
| Self-Calibrating Vector Helium Magnetometer (SVHM), Phase II |
Completed
|
— |
Field and Particle Detectors |
Goddard Space Flight Center |
| Inherently Stiff Membranes with Shape Memory, Phase I |
Completed
|
— |
Smart Materials |
Marshall Space Flight Center |
| Advanced Crew Escape System Simulation Tool for Future Launch Vehicles, Phase I |
Completed
|
— |
Food Production, Processing, and Preservation |
Marshall Space Flight Center |
| A 200 MHz Bandwidth, 4096 Spectral Channels, 3 W Power Consumption, Digital Auto-Correlation Spectrometer Chip for Spaceborne Microwave Radiometers, Phase I |
Completed
|
— |
Microwave, Millimeter Waves, and Submillimeter Waves |
Jet Propulsion Laboratory |
| Development and Evaluation of Mixed Uranium-Refractory Carbide/Refractory Carbide Cer-Cer Fuels, Phase I |
Completed
|
— |
Alternative Low-Carbon Jet Fuel |
Glenn Research Center |
| Solid State MEMS Thrusters Using Electrically Controlled Extinguishable Solid Propellant, Phase I |
Completed
|
— |
Integrated Systems and Ancillary Technologies |
Marshall Space Flight Center |
| Hydrogen Recovery by ECR Plasma Pyrolysis of Methane, Phase II |
Completed
|
— |
Resource Processing for Production of Mission Consumables |
Marshall Space Flight Center |
| Individualized Fatigue Meter for Space Exploration, Phase I |
Completed
|
— |
Behavioral Health and Performance |
Johnson Space Center |
| Ceramic Composite Mechanical Fastener System for High-Temperature Structural Assemblies, Phase I |
Completed
|
— |
Manufacturing Processes |
Armstrong Flight Research Center |
| Novel Technology for In-Space Manufacture of Thin Membranes for Solar Sails, Phase II |
Completed
|
— |
In-Space Propellant Storage and Use |
Langley Research Center |
| Single Molecule Instrument for Surface Enhanced Raman Optical Activity of Biomolecules, Phase I |
Completed
|
— |
Atomic and Molecular Species Assessment |
Ames Research Center |
| SUPERPOLISHED SI COATED SIC OPTICS FOR RAPID MANUFACTURE OF LARGE APERTURE UV AND EUV TELESCOPES, Phase I |
Completed
|
— |
Electronics and Optics Manufacturing Processes |
Goddard Space Flight Center |
| A Digital Correlation Spectrometer Chip with 1 GHz Bandwidth, 4096 Spectral Channels, and 4 W Power Consumption for Passive Microwave Remote Sensing Instruments, Phase II |
Completed
|
— |
Microwave, Millimeter Waves, and Submillimeter Waves |
Jet Propulsion Laboratory |
| Electronic Modeling and Design for Extreme Temperatures, Phase I |
Completed
|
— |
Electronics Development Tools |
Goddard Space Flight Center |
| New Technique to Identify the Onset of Combustion Instability, Phase I |
Completed
|
— |
Radiation-Hardened Extreme-Environment Components and Implementations |
Glenn Research Center |
| Autonomous Control of Space Nuclear Reactors, Phase I |
Completed
|
— |
Heat Rejection and Storage |
Glenn Research Center |
| Ormosil Beads for Insulation of Ground Cryogenic Storage Tanks, Phase II |
Completed
|
— |
Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors |
Kennedy Space Center |
| An Integrated Turbulence Hazard Decision Support Tool for Controllers and Dispatchers, Phase I |
Completed
|
— |
Traffic Management Concepts |
Ames Research Center |
| Novel Medical Diagnostic Instrument based on Real-time Breath Analysis, Phase I |
Completed
|
— |
Food Production, Processing, and Preservation |
Glenn Research Center |
| Integrated Microchannel Reformer/Hydrogen Purifier for Fuel Cell Power Systems, Phase II |
Completed
|
— |
Electrochemical Storage: Fuel Cells |
Johnson Space Center |
| Autonomous Resource Allocation and Task Management for Multi-Spacecraft Formatio, Phase I |
Completed
|
— |
Activity and Resource Planning and Scheduling |
Jet Propulsion Laboratory |
| A Post-Processing System for Physics Based Derived Rotorcraft Computational Aero-Acoustics Simulations, Phase II |
Completed
|
— |
Thermal Control Analysis |
Langley Research Center |
| Data Reduction and Rapid Analysis of Hyperspectral Data Sets, Phase I |
Completed
|
— |
High-Performance Processors |
Stennis Space Center |
| Self-Calibrating Vector Helium Magnetometer (SVHM), Phase I |
Completed
|
— |
Field and Particle Detectors |
Goddard Space Flight Center |