Search NASA's TechPort inventory — every technology R&D project the agency has tracked, active and completed. Harvested gradually in the background (TechPort only exposes one project per API call, ~21,000 total), so the list grows over time rather than all at once.
What's active and early-stage — where getting involved could matter →
21,052 projects harvested so far — page 94 of 422.
| Title | Status | TRL | Technology area | Lead organization |
|---|---|---|---|---|
| Hybrid Computational Model for High-Altitude Aeroassist Vehicles, Phase I | Completed | — | Aerothermodynamics | Langley Research Center |
| Vision-Based Attitude and Formation Determination System, Phase I | Completed | — | Attitude Estimation Sensors | Goddard Space Flight Center |
| Enhanced Brine Dewatering System, Phase I | Completed | — | Logistics Management | Johnson Space Center |
| Flow-Angle and Airspeed Sensor System (FASS) Using Flush-Mounted Hot-Films, Phase I | Completed | — | Aerodynamics | Armstrong Flight Research Center |
| Small Space Platform Enhanced Internet Protocol Stack Device, Phase I | Completed | — | Informatics and Decision Support Systems | Ames Research Center |
| Ultraviolet Water Treatment and Biofilm Reduction Using Black Light Materials, Phase I | Completed | — | Lightweight Structural Materials | Johnson Space Center |
| Multidisciplinary Design Under Uncertainty for Entry Vehicles, Phase I | Completed | — | Integrated Modeling and Simulation for EDL | Ames Research Center |
| Innovative Applications of DoD Propulsion Technology for Low-Cost Satellite Missions, Phase II | Completed | — | Solar Thermal Propulsion | Ames Research Center |
| Lunar Navigator - A Miniature, Fully Autonomous, Lunar Navigation, Surveyor, and Range Finder System, Phase I | Completed | — | State Estimation | Ames Research Center |
| Diamond-Based Sub Millimeter Backward Wave Oscillator, Phase I | Completed | — | Food Production, Processing, and Preservation | Jet Propulsion Laboratory |
| Additive Manufactured Coronagraph Bench for Detection of Exoplanets | Completed | 3 | Digital Transformation Technologies for Manufacturing | Goddard Space Flight Center |
| Titanium Matrix Composite Pressure Vessel, Phase II | Completed | — | Manufacturing Processes | Jet Propulsion Laboratory |
| GPS Attitude Determination for Launch Vehicles, Phase I | Completed | — | Attitude Estimation Sensors | Goddard Space Flight Center |
| Wireless Sensor Portal Technology, Phase II | Completed | — | Test Instruments and Sensors | Stennis Space Center |
| Modular NanoSat Launcher Design for Lowest Mission Cost, Phase I | Completed | — | Launch Vehicle Propellant | Ames Research Center |
| Large Format Uncooled Focal Plane Array, Phase II | Completed | — | Detectors and Focal Planes | Langley Research Center |
| Chip Integrated, Hybrid EHD/Capillary Driven Thermal Management System Project | Completed | 4 | Heat Rejection and Storage | Goddard Space Flight Center |
| Peak-Seeking Control for Trim Optimization | Completed | 6 | Advanced Atmospheric Flight Vehicles | Armstrong Flight Research Center |
| Space-Qualifiable Cyanate Ester Elastomer, Phase I | Completed | — | Materials for Electrical Power Generation, Energy Storage, Power Distribution, and Electrical Machines | Glenn Research Center |
| Detection of Life Forms, Phase I | Completed | — | Atomic and Molecular Species Assessment | Ames Research Center |
| Electrostatic Spectrometer for Mars Rover Wheel (WES) | Completed | — | Destination Resource Exploration | Kennedy Space Center |
| An Advanced Cooling System for In-Situ Resource Utilization, Phase I | Completed | — | Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors | Goddard Space Flight Center |
| Emissive Ion Thruster -EMIT, Phase I | Completed | — | Electrostatic Propulsion | Glenn Research Center |
| Integration of HSRL Measurement Capability into the Ozone DIAL System for Deployment on the NASA DC-8 | Completed | — | Microwave, Millimeter Waves, and Submillimeter Waves | NASA Headquarters |
| Aerospace Grade Carbon Felt Preform, Phase I | Completed | — | Thermal Protection Materials | — |
| Feasibility of a 5mN Laser-Driven Mini-Thruster, Phase I | Completed | — | Nuclear Thermal Propulsion | Glenn Research Center |
| Advanced Flow Analyses in Complex Feed Systems, Phase II | Completed | — | Food Production, Processing, and Preservation | Stennis Space Center |
| Improved Carbon Dioxide Reduction System, Phase I | Completed | — | Food Production, Processing, and Preservation | Johnson Space Center |
| Spacecraft Water Regeneration by Catalytic Wet Air Oxidation, Phase I | Completed | — | Thermal Protection Materials | Marshall Space Flight Center |
| Tracking Launch Vehicles in Interference and Jamming, Phase II | Completed | — | Attitude Estimation Sensors | Kennedy Space Center |
| Multiuser Collaboration for Planetary Mobility and Robotics, Phase I | Completed | — | Static Energy Conversion | Jet Propulsion Laboratory |
| Laser-Induced Emissions Sensor for Soot Mass in Rocket Plumes, Phase I | Completed | — | Propulsion Flowpath and Interactions | Stennis Space Center |
| NavCube: A fully realized modernized GPS receiver | Completed | 3 | Microwave, Millimeter Waves, and Submillimeter Waves | Goddard Space Flight Center |
| Advanced Electroactive Single Crystal and Polymer Actuators for Passive Optics, Phase II | Completed | — | Mechanism-Life-Extension Systems | Langley Research Center |
| Milliwatt Radioisotope Stirling Convertor, Phase II | Completed | — | Electrical Power Conversion and Regulation | Glenn Research Center |
| Course of Action Simulation, Phase I | Completed | — | Radiation-Hardened Extreme-Environment Components and Implementations | Ames Research Center |
| Advanced Nongray Radiation Module in the LOCI Framework for Combustion CFD, Phase II | Completed | — | Integrated Modeling and Simulation for EDL | Marshall Space Flight Center |
| Laser Materials for Remote Sensing of Ozone, Phase II | Completed | — | — | Langley Research Center |
| Fuel Cell/Li-ion Battery Hybrid Power System for Space Suits, Phase I | Completed | — | Electrochemical Storage: Fuel Cells | Johnson Space Center |
| DEVELOPMENT OF A LOW POWER, LOW MASS, SMALL AND EASILY DEPLOYABLE PLANETARY BROADBAND MICRO-SEISMOMETER | Completed | 2 | Microwave, Millimeter Waves, and Submillimeter Waves | — |
| Ultra-Low Noise Quad Photoreceiver for Space Based Laser Interferometric Gravity Wave Detection, Phase I | Completed | — | Detectors and Focal Planes | Goddard Space Flight Center |
| Ultralightweight, Regeneratively Cooled Combustion Chamber for Mars Ascent Vehicles, Phase I | Completed | — | Sustainable Manufacturing | Jet Propulsion Laboratory |
| Atomic Layer Deposition to Enable the Production, Optimization and Protection of Spaceflight Hardware Project (ALD) | Completed | 4 | Special Materials | Goddard Space Flight Center |
| Ground Enterprise Management System, Phase II | Completed | — | Team Preparedness and Training | Ames Research Center |
| Detecting Fossilized Microscopic Life Forms on Mars with Dual-Energy CT, Phase I | Completed | — | Decompression Sickness Mitigation | Jet Propulsion Laboratory |
| Structural-Acoustic Simulations in Early Airframe Design, Phase I | Completed | — | Aeroelasticity | Langley Research Center |
| Ad-hoc Content-based Queries and Data Analysis for Virtual Observatories, Phase II | Completed | — | High-Performance Data Analytics Platform | Goddard Space Flight Center |
| Cryogenic Vibration Damping Mechanisms for Space Telescopes and Interferometers, Phase I | Completed | — | Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors | Jet Propulsion Laboratory |
| Intelligent Agents for Improved Ground-Test Operations, Phase I | Completed | — | Collaboration and Interaction | Stennis Space Center |
| Trajectory and Performance Models for Earth and Planetary Balloons, Phase I | Completed | — | Integrated Modeling and Simulation for EDL | Goddard Space Flight Center |
curl -sS "https://devops.majbase.com/nasa-tech-projects/api?q=laser&status=Active&sort=trl&page=1"
Returns {"rows": [...], "total", "page", "pages"}, or {"error": "..."} if temporarily unavailable. All query params are optional.