| Flight Test Evaluation of Endurance-Maximizing Periodic Cruise Trajectories for UAV, Phase I |
Completed
|
— |
Trajectory Design and Analysis |
Armstrong Flight Research Center |
| Microfabricated G-Band Antenna Arrays, Phase I |
Completed
|
3 |
Microwave, Millimeter Waves, and Submillimeter Waves |
Jet Propulsion Laboratory |
| Cooled Bolometer IR Monolithic FPA, Phase I |
Completed
|
— |
Detectors and Focal Planes |
Jet Propulsion Laboratory |
| Robust Traffic Flow Management: Coevolutionary Approach, Phase I |
Completed
|
— |
Traffic Management Concepts |
Ames Research Center |
| Gas-Kinetic Navier-Stokes Solver for Hypersonic Flows in Thermal and Chemical Non-Equilibrium, Phase I |
Completed
|
— |
Hypersonic Decelerators |
Langley Research Center |
| A Phase I Program to Improve Low Temperature Performance of Lithium-Ion Batteries, Phase I |
Completed
|
— |
Electrochemical Storage: Batteries |
Glenn Research Center |
| Topology Control Algorithms for Spacecraft Formation Flying Networks Under Connectivity and Time-Delay Constraints, Phase II |
Completed
|
— |
Onboard Maneuvering, Pointing, Stabilization, and Flight Control Algorithms |
Jet Propulsion Laboratory |
| Innovative Reduced Mass TPS Designs for Human-Rated Aeroassit Vehicles, Phase I |
Completed
|
— |
Thermal Protection Systems |
Ames Research Center |
| A Unified Network Security Architecture for Large, Distributed Networks, Phase I |
Completed
|
— |
Cloud Computing |
Goddard Space Flight Center |
| Silicon Microchannel Plate Large Area UV Detector, Phase II |
Completed
|
— |
Detectors and Focal Planes |
Goddard Space Flight Center |
| Software Defined Common Processing System (SDCPS), Phase II |
Completed
|
— |
High-Performance Processors |
Glenn Research Center |
| Hybrid Prediction Method for Aircraft Interior Noise, Phase II |
Completed
|
— |
Robot Navigation and Path Planning |
Langley Research Center |
| Hybrid Guidance System for Relative Navigation, Phase II |
Completed
|
— |
Modeling, Simulation, Analysis, and Testing of Rendezvous, Proximity Operations, and Capture |
Goddard Space Flight Center |
| Power for Vehicle Embedded MEMS Sensors, Phase II |
Completed
|
— |
Above-Surface Mobility |
Langley Research Center |
| Large Scale Inert Anode for Molten Oxide Electrolysis, Phase I |
Completed
|
— |
Mirror Systems |
Kennedy Space Center |
| Wireless Health Monitoring for Large Arrays of MEMS Sensors and Actuators, Phase I |
Completed
|
— |
Fault Diagnosis and Prognosis |
Ames Research Center |
| Ultra Compact Cloud Physics Lidar for UAV Platforms, Phase II |
Completed
|
— |
Lasers |
Goddard Space Flight Center |
| High Specific-Strength C-Zr(O)C / C-Ablator TPS for CEV, Phase II |
Completed
|
— |
Thermal Protection Materials |
Ames Research Center |
| Single Crystal Bimorph Array (SCBA) Driven Deformable Mirror (DM), Phase II |
Completed
|
— |
Thermal Conditioning for Sensors, Instruments, Samples, and High-Efficiency Electric Motors |
Jet Propulsion Laboratory |
| Low Power, Small Form Factor, High Performance EVA Radio Employing Micromachined Contour Mode Piezoelectric Resonators and Filters, Phase I |
Completed
|
— |
Innovative RF Technologies |
Johnson Space Center |
| A Revolutionary Wind and Precipitation Scanning Radar for Unmanned Aerial Vehicles, Phase I |
Completed
|
— |
Microwave, Millimeter Waves, and Submillimeter Waves |
Goddard Space Flight Center |
| In-situ / In-flight Detection of Fluorescent Proteins Using Imaging Spectroscopy Sensors, Phase I |
Completed
|
— |
Medical Diagnosis and Prognosis |
Marshall Space Flight Center |
| Carbon Nanotube Electron Sources for Air Purification, Phase I |
Completed
|
— |
Remediation |
Ames Research Center |
| Remote EMI Field Strength Mapping, Phase II |
Completed
|
— |
Electromagnetic Environment Effects |
Kennedy Space Center |
| One Micron Q-switched Single Crystal LIDAR Fiber Laser, Phase I |
Completed
|
— |
Lasers |
Goddard Space Flight Center |
| Rigidizing Inflatable Deployable Dwelling (RIDD), Phase I |
Completed
|
— |
Materials for Electrical Power Generation, Energy Storage, Power Distribution, and Electrical Machines |
Marshall Space Flight Center |
| C-Band SATCOM Range Communications System for ELVs using ESAs and High Dynamics Modem, Phase I |
Completed
|
— |
Cognitive Networking |
Kennedy Space Center |
| Nano-Engineered Materials for Rapid Rechargeable Space Rated Advanced Li-Ion Batteries, Phase I |
Completed
|
— |
Electrochemical Storage: Batteries |
Johnson Space Center |
| High-Speed, Low-Power Digitizer II (2007037), Phase II |
Completed
|
— |
Detectors and Focal Planes |
Jet Propulsion Laboratory |
| Reprogrammable Radiation Tolerant Secure Network Access Module, Phase I |
Completed
|
— |
Information Assurance |
Glenn Research Center |
| Tunable Multiplexed Resonant Dipole Nanoantenna Array, Phase I |
Completed
|
— |
Structures and Antennas |
Glenn Research Center |
| Deep UV Semiconductor Sourcess for Advanced Planetary Science Instruments, Phase I |
Completed
|
3 |
Lasers |
Jet Propulsion Laboratory |
| Radio Frequency Micro Ion Thruster for Precision Propulsion, Phase I |
Completed
|
— |
Electrostatic Propulsion |
Jet Propulsion Laboratory |
| High Reflectivity, Broad-Band Silver Coating, Phase I |
Completed
|
— |
Coatings |
Jet Propulsion Laboratory |
| Intelligent, reusable software for plug and play space avionics, Phase I |
Completed
|
4 |
Informatics and Decision Support Systems |
Ames Research Center |
| An optical scanning subsystem for a UAS-enabled hyperspectral radiometer (AirSHRIMP) |
Completed
|
7 |
Microwave, Millimeter Waves, and Submillimeter Waves |
Goddard Space Flight Center |
| Miniature Mass Spectrometer for Earth Science Research, Phase I |
Completed
|
— |
Above-Surface Mobility |
Goddard Space Flight Center |
| SmartTopo Intelligent Real-Time Topographic Information Collection System, Phase I |
Completed
|
— |
Knowledge and Model Building |
Johnson Space Center |
| Pneumatic Excavation Mechanism for Lunar Resource Utilization, Phase II |
Completed
|
5 |
Resource Acquisition, Isolation, and Preparation |
Kennedy Space Center |
| Advanced 3D Human Simulation Components with Thermal/Haptic Feedback and Tissue Deformation, Phase I |
Completed
|
— |
Informatics and Decision Support Systems |
Johnson Space Center |
| LOW COST AUTOMATED MODULE ASSEMBLY FOR 180 GHz DEVICES, Phase I |
Completed
|
3 |
Detectors and Focal Planes |
Jet Propulsion Laboratory |
| Miniaturized UHF, S-, and Ka-band RF MEMS Filters for Small Form Factor, High Performance EVA Radio, Phase II |
Completed
|
— |
Informatics and Decision Support Systems |
Johnson Space Center |
| Design of Versatile Food Extruder, Phase I |
Completed
|
— |
Habitability and Environment |
Johnson Space Center |
| A Novel Low-Cost Dual-Wavelength Precipitation Radar Sensor Network, Phase I |
Completed
|
— |
Microwave, Millimeter Waves, and Submillimeter Waves |
Goddard Space Flight Center |
| A Solid State Tissue Equivalent Detector for Microdosimetry, Phase I |
Completed
|
— |
Detectors and Focal Planes |
Ames Research Center |
| Rapid Protoyping Software for Developing Next-Generation Air Traffic Management Algorithms, Phase II |
Completed
|
— |
Trajectory Design and Analysis |
Ames Research Center |
| OptoCeramic-Based High Speed Fiber Multiplexer for Multimode Fiber, Phase I |
Completed
|
4 |
Data Reduction Hardware Systems |
Goddard Space Flight Center |
| Shielded ADR Magnets For Space Applications, Phase I |
Completed
|
— |
Protection Systems |
Goddard Space Flight Center |
| A Highly Integrated Multi-Parameter Distributed Fiber-Optic Instrumentation System, Phase II |
Completed
|
— |
Instrumentation and Health Monitoring for EDL |
Langley Research Center |
| Self-Calibrating Greenhouse Gas Balloon-Borne Sensor, Phase II |
Completed
|
— |
Environment Sensors |
Ames Research Center |