| Critical 2D-to-3D Transformation of NASA's VESGEN Software for Astronaut Health Countermeasures and Terrestrial Medicine/Ecological Commercialization |
Completed
|
3 |
— |
Ames Research Center |
| Novel Control Techniques for Hand and Wrist Robotic Rehabilitation |
Completed
|
3 |
Dexterous Manipulation |
Rice University |
| Solid Lithium Ion Conductors (SLIC) for Lithium Solid State Batteries |
Completed
|
3 |
Electrochemical Storage: Batteries |
Jet Propulsion Laboratory |
| AI-Enhanced Microweather Nowcasting for Safe Urban Air Mobility |
Completed
|
3 |
Weather and Environment |
Langley Research Center |
| Development of an integrated system for cell analysis and profiling by capillary electrophoresis-mass spectrometry |
Completed
|
3 |
Environment Sensors |
University of Kansas |
| FAME: Fast Affordance Manipulation Execution |
Completed
|
3 |
Dexterous Manipulation |
University of Michigan-Ann Arbor |
| In situ sensor for accurate measurement of extinction coefficients and lidar ratios of aerosols and clouds |
Completed
|
4 |
Sensors and Instruments |
Ames Research Center |
| Using Graphics Processing Units to Accelerate CFD Simulations Requiring General Gas Chemistry |
Completed
|
— |
Integrated Modeling and Simulation for EDL |
Langley Research Center |
| Fluidic Telescope: Enabling the Next Generation of Large Space Observatories (FLUTE) |
Completed
|
3 |
Manufacturing Processes |
Ames Research Center |
| Broadband Laser Source and Spectrally Resolved Detection for Spectroscopic LiDAR Instrument |
Completed
|
2 |
Lasers |
Goddard Space Flight Center |
| Low Temperature Atmospheric Pressure Plasma Sterilization Shower, Year 2 |
Completed
|
4 |
— |
Ames Research Center |
| Structured Sorbents: Rapid Cycle Temperature Swing Adsorption (TSA) |
Completed
|
4 |
Atmosphere Revitalization |
Marshall Space Flight Center |
| Autonomous Landing and Proximity Operation Technology for Poorly-Characterized Small Bodies |
Active
|
2 |
Touchdown Systems |
Georgia Institute of Technology-Main Campus |
| Characterization of Plasmadynamics within a Small Magnetic Nozzle |
Completed
|
3 |
Electromagnetic Propulsion |
University of Michigan-Ann Arbor |
| Electrified Liquid Jets from Nanostructured Surfaces for Phase Change Heat Transfer Enhancement |
Completed
|
3 |
Heat Transport |
Georgia Institute of Technology-Main Campus |
| In-Space Manufacturing, Assembly, and Repair Technologies for Space Structures (I-SMART) |
Completed
|
3 |
Manufacturing Processes |
Glenn Research Center |
| Space-based Human Reliability Analysis Development, Year 2 (HRA) |
Completed
|
3 |
Human Factors Engineering |
Johnson Space Center |
| Development of a Wave Front Control system for space utilizing MEMS Deformable Mirrors |
Completed
|
5 |
— |
Ames Research Center |
| Forceful manual manipulation with millirobot ensembles on unreliable substrates |
Completed
|
3 |
Collaborative Mobility |
University of California-Berkeley |
| Development of High-Energy and Low-Cost Semi-Solid Sodium Batteries Operating at Extreme Cold Temperatures |
Completed
|
3 |
Electrochemical Storage: Batteries |
Dartmouth College |
| Magnetic and low-dissipation applications of topological materials at limited dimensions |
Completed
|
3 |
Electronic Packaging and Implementations |
Yale University |
| Apollo Regolith Thermally Constrained Landing Pad Bricks (ARTC Bricks) |
Completed
|
2 |
Resource Processing for Production of Manufacturing, Construction, and Energy Storage Feedstock Materials |
The University of Texas at San Antonio |
| Advanced Applications of Generative Design and Digital Manufacturing |
Completed
|
4 |
Multiscale, Multiphysics, and Multifidelity Simulation |
Goddard Space Flight Center |
| Lunar lander Fuel Cell (LFC-ACO) |
Completed
|
5 |
Electrochemical Storage: Fuel Cells |
Blue Origin, LLC |
| Diffractive Solar Sailing |
Completed
|
4 |
Solar Sails |
Johns Hopkins University: Applied Physics Laboratory |
| Fission Fragment Dust Experiment |
Completed
|
4 |
— |
Marshall Space Flight Center |
| Design and Fabrication of a Novel Paper Based Biosensor for Health Diagnostics, Year 2 |
Completed
|
3 |
— |
Ames Research Center |
| Graphene Transparent Conductive Electrodes |
Completed
|
3 |
— |
Goddard Space Flight Center |
| Economical Access to Space, Year 1 |
Completed
|
5 |
— |
Armstrong Flight Research Center |
| Dependable Neural Networks for Identifying Anomalous Behavior in Real-Time Operations, Year 2 |
Completed
|
— |
Intelligent Data Understanding |
Jet Propulsion Laboratory |
| SSC CIF Project Ideation Fund |
Completed
|
2 |
— |
Stennis Space Center |
| 1035nm CASALS Lidar for Navigation Velocity and 3-D imaging Measurements |
Completed
|
3 |
Revolutionary PNT Technologies |
Goddard Space Flight Center |
| Ultra Long-Lived Autonomous Air Quality Sensing, Year 2 |
Completed
|
5 |
— |
Johnson Space Center |
| Behavioral Health and Performance (BHP) |
Completed
|
5 |
Behavioral Health and Performance |
Johnson Space Center |
| Fiber Optic Augmented Reality System (FOARS) |
Completed
|
5 |
— |
Armstrong Flight Research Center |
| Ontology and Language for Intelligent Reusable Autonomy |
Completed
|
6 |
Semantic Technologies |
Stennis Space Center |
| Enabling Self-Propelled Condensate Flow During Phase-Change Heat Rejection Using Surface Texturing |
Completed
|
4 |
Heat Rejection and Storage |
University of California-Davis |
| Fundamentals of 3D Deployable Mechanisms in Space |
Completed
|
3 |
Flexible Material Systems |
Brigham Young University-Provo |
| Voxel Advanced Digital-manufacturing for Earth & Regolith in Space, Year 2 (VADERS) |
Completed
|
3 |
— |
Kennedy Space Center |
| Gas House Autonomous System Monitoring, Year 2 (GHASM) |
Completed
|
4 |
— |
Stennis Space Center |
| Exploration of Extreme Terrain Using a Polyhedral Rover |
Completed
|
3 |
Above-Surface Mobility |
Cornell University |
| Adapting JWST post-processing software for high contrast imaging with Roman/CGI and a Future Direct Imaging Flagship Mission |
Completed
|
3 |
Modeling |
Jet Propulsion Laboratory |
| Resistive Memory Devices for Radiation Resistant Non-Volatile Memory |
Completed
|
3 |
High-Performance Memories |
SUNY at Albany |
| Atmospheric-Breathing Supersonic Propulsion System for Future Planetary Exploration |
Completed
|
3 |
Ramjet/Scramjet |
Langley Research Center |
| High Dynamic Range Stereo x (HiDyRS-x) |
Completed
|
5 |
Nondestructive Inspection, Evaluation, and Root Cause Analysis |
Stennis Space Center |
| Advanced Terrain Imaging with Communication Signals, Year 2 |
Completed
|
3 |
Cognitive Networking |
Glenn Research Center |
| Storage and Containment of Nuclear Targets for Pulsed Fission-Fusion Testing |
Completed
|
4 |
Nuclear Thermal Propulsion |
Marshall Space Flight Center |
| HiVHAc Thruster Wear and Structural Tests |
Completed
|
5 |
Electrostatic Propulsion |
Glenn Research Center |
| Low Power Charged Particle Counter for Space Radiation Monitoring |
Completed
|
3 |
Detectors and Focal Planes |
Glenn Research Center |
| Development of a Mechanically Versatile Bioreactor System as a Cellular Microgravity Countermeasure for Regenerative Medicine Applications |
Completed
|
3 |
Prevention and Countermeasures |
Stanford University |