| Computational Modeling of Nondestructive Evaluation, Defect Detection, and Defect Identification for CFRP Composite Materials |
Completed
|
4 |
Nondestructive Evaluation and Sensors |
Iowa State University |
| Alpha/Betavoltaic Power Sources |
Completed
|
4 |
Electrical Power Conversion and Regulation |
Ames Research Center |
| Optical Fibers with Protective Flexible Coatings for Signal and Energy Transmission in Harsh Lunar & Planetary Environments |
Completed
|
— |
Insulation and Interfaces |
Glenn Research Center |
| Wavefront Control for High Performance Coronagraphy on Segmented and Centrally Obscured Telescopes |
Completed
|
4 |
Optical Components |
University of Arizona |
| Radiation Detection Using Passive Surface Acoustic Wave Sensors |
Completed
|
2 |
Monitoring Technology |
Kennedy Space Center |
| Heat Rejection System for Thermal Management in Space Utilizing a Planar Variable-Conductance Heat Pipe |
Completed
|
4 |
Heat Rejection and Storage |
Case Western Reserve University |
| Technology Assessment and Modeling of Three Terminal Tandem Solar Cells for in-Space Utilization |
Completed
|
3 |
Photovoltaic Electrical Power |
Glenn Research Center |
| Lunar Crater Radio Telescope (LCRT) on the Far-Side of the Moon (LCRT) |
Completed
|
3 |
Sensors and Instruments |
Jet Propulsion Laboratory |
| Development and Validation of a Model for Lunar/Martian GOX Liquefaction Process |
Completed
|
4 |
Propulsion Systems |
— |
| Exploiting Dynamic Magnetic Fields for New Magnetorheological Fluid Damping Capability |
Completed
|
3 |
Innovative and Multifunctional Concepts |
University of Central Florida |
| Electric Controlled Extinguishable Solid Propellant |
Completed
|
3 |
Solids |
Marshall Space Flight Center |
| Small Active Readout Device for Dose Spectra from Energetic Particles and Neutrons (DoSEN) |
Completed
|
4 |
Monitoring Technology |
University of New Hampshire-Main Campus |
| Gesture Commanding of a Robot with EVA Gloves |
Completed
|
5 |
— |
Johnson Space Center |
| Digital mMirror Device Flight Spectrometer |
Completed
|
3 |
Detectors and Focal Planes |
Ames Research Center |
| Hybrid-Composite Habitat to Enable Human Exploration Missions |
Completed
|
2 |
Habitation Systems |
Langley Research Center |
| Mass Measurements of an Electrospray Beam from a Single Emitter Ionic Liquid Ferrofluid Electrospray Source |
Completed
|
3 |
Electrostatic Propulsion |
Michigan Technological University |
| BALloon Locomotion for Extreme Terrain (BALLET) |
Completed
|
2 |
Surface Mobility |
Jet Propulsion Laboratory |
| Direct Generation of Oxygen via Electrocatalytic Reduction of Carbon Dioxide in an Ionic Liquid |
Completed
|
3 |
Atmosphere Revitalization |
University of Colorado Boulder |
| Autonomous Deep-Space Optical Navigation, Year 1 |
Completed
|
6 |
Onboard Navigation Algorithms |
Johnson Space Center |
| Method development of self-correction for real time CO2 monitoring using an ultra-low power and wearable sensor, Year 2 |
Completed
|
2 |
Contactless and Wearable Human Health and Performance Monitoring |
Ames Research Center |
| Particle Image Velocimetry/Tracking, Ejecta Sheet Monitoring, and Terrain Mapping for SCALPSS 2 |
Completed
|
4 |
Other Entry, Descent, and Landing |
Langley Research Center |
| An Investigation of Cryo-Capable Electronics for Surviving the Lunar Night |
Completed
|
4 |
Power Management and Distribution |
Glenn Research Center |
| Future Autonomous and Automated Systems Testbed |
Completed
|
3 |
Onboard Navigation Algorithms |
Johnson Space Center |
| Nano Icy Moons Propellant Harvester (NIMPH) |
Completed
|
2 |
Resource Acquisition, Isolation, and Preparation |
ExoTerra Resource, LLC |
| Nanoscale Vacuum Electronics: Back to the Future? |
Completed
|
3 |
— |
Ames Research Center |
| Calibration and Validation for Constellations of Remote Sensing CubeSats with Microwave Radiometers |
Completed
|
3 |
Distributed Aperture |
Massachusetts Institute of Technology |
| Unsteady Pressure-Sensitive Paint for Evaluating Capsule Dynamic Stability (uPSP) |
Completed
|
3 |
Aerodynamics |
Ames Research Center |
| Additive Manufacturing of In-Core Heat Pipes for Space Nuclear Power and Propulsion |
Completed
|
4 |
Heat Sources |
Glenn Research Center |
| Modeling and Mitigation of Heavy-Ion Device Degradation and Failure in SiC Schottky Diodes for Space Electronics |
Completed
|
1 |
Materials for Electrical Power Generation, Energy Storage, Power Distribution, and Electrical Machines |
Ames Research Center |
| Portable Intravenous Fluid Production Device for Ground Use Project |
Completed
|
3 |
— |
Kennedy Space Center |
| Materials Manufactured from 3D Printed Synthetic Biology Arrays |
Completed
|
3 |
— |
Ames Research Center |
| Towards In-Space Additive Manufacturing of Thermosets and Embedded Fibers, Year 1 |
Completed
|
4 |
— |
Marshall Space Flight Center |
| Collector Contamination Requirements for Life Detection in Enceladus' Icy Plumes |
Completed
|
3 |
— |
Ames Research Center |
| Next Generation of Submm-Wave Spectrometers for Planetary Exploration |
Completed
|
3 |
Detectors and Focal Planes |
Jet Propulsion Laboratory |
| Pulsed Lorentz Accelerator |
Completed
|
3 |
Electrostatic Propulsion |
Marshall Space Flight Center |
| Hybrid Windows and Mosaic Video: Reducing Complexity of Space Habitable Modules |
Completed
|
2 |
Relative Navigation Sensors |
Johnson Space Center |
| Amorphous Background Oriented Schlieren for Flight Test (Study) |
Completed
|
4 |
Detectors and Focal Planes |
Armstrong Flight Research Center |
| Ultrasonic Stir Welding Development for Ground Based & In-Situ Fabrication & Repair for In Space Propulsion Systems/Commercial Space Sector |
Completed
|
4 |
Manufacturing Processes |
Marshall Space Flight Center |
| A Circuit-Level Radiation Hardened-By-Design Approach for Standard CMOS |
Completed
|
3 |
Radiation-Hardened Extreme-Environment Components and Implementations |
The University of Tennessee-Knoxville |
| Quasicontinuum Fracture Modeling and Development of Refractory High Entropy Alloys |
Completed
|
2 |
Thermal Protection Systems |
University of Minnesota-Twin Cities |
| Wide-Bandgap III-V Materials for Multijunction Solar Cell Applications |
Completed
|
3 |
Photovoltaic Electrical Power |
Yale University |
| Efficient Adaptive Learning for Robotic Operations in Unmodeled Environments with Dynamic Uncertainties |
Active
|
2 |
Small-Body and Microgravity Mobility |
The University of Texas at Austin |
| A Compact, High-Precision Optical Payload Enabling Earth-Sized Exoplanet Detection Using Nanosatellites |
Completed
|
3 |
Optical Components |
Massachusetts Institute of Technology |
| Phase-change Reconfigurable Optical WavEfront Synthesis System (PROWESS) |
Completed
|
4 |
Remote Sensing Instruments and Sensors |
Langley Research Center |
| Meteoroid Impact Detection for Exploration of Asteroids (MIDEA) |
Completed
|
3 |
Destination Resource Exploration |
Stanford University |
| Instant Landing Pads for Artemis Lunar Missions |
Completed
|
2 |
Touchdown Systems |
Masten Space Systems, Inc. |
| Simulation and Design Environment for In-Space Assembly Metrology |
Completed
|
— |
Engineering and Integrity |
Langley Research Center |
| Development of a Wide-Spectrum Organic Analysis Instrument, Year 1 |
Completed
|
7 |
— |
Johnson Space Center |
| Repair of Mis-drilled Holes by Cold Welding |
Completed
|
2 |
Materials, Structures, Mechanical Systems, and Manufacturing |
Armstrong Flight Research Center |
| In-flight Diagnostic Capability for Crew Health by DESI-mass spectrometry |
Completed
|
4 |
Medical Diagnosis and Prognosis |
Johnson Space Center |